STEP3 Video connections
Video cable
7Connecting a television with a VIDEO IN terminal
Simple setup
VIDEO
IN 
Rear panel of this unit
VIDEO OUT terminal
Do not connect the unit through a video cassette recorder, because the picture may not be played correctly due to the copy guard.
Television
(not included)
Video cable
(included)
VIDEO
OUT
7Connecting a television with COMPONENT VIDEO IN terminals
COMPONENT
VIDEO IN
PR
PB 
Y 
Video cables
(not included)
Rear panel of this unit
COMPONENT
VIDEO OUT
PR
Y
PB
COMPONENT VIDEO OUT terminals
These terminals can be used for either interlace or progressive output and provide a purer picture than the S VIDEO OUT terminal. Connection using these terminals outputs the color difference signals (PB/PR) and luminance signal (Y) separately in order to achieve high fidelity in reproducing colors. The description of the component video input terminals depends on the television or monitor (e.g. Y/PB/PR,Y/
To enjoy progressive video
1.Connect to the component video input terminals on a 480P compatible television. (Video will not be displayed correctly if connected to an incompatible television.)
2.In QUICK SETUP, set “Progressive Out” to “Enable”.
3.Change “Progressive” to “480P” (A page 21, Picture Menu—
Video Output Mode).
•All televisions manufactured by Panasonic that have 480P input connectors are compatible. Consult the manufacturer if you have another brand of television.
•If the unit is connected to the television through VIDEO OUT or S VIDEO OUT, output will be interlace, irrespective of the settings.
7Connecting a television with an S VIDEO IN terminal
S VIDEO OUT terminal
The S VIDEO terminal achieves a more vivid picture than the VIDEO
OUT terminal by separating the chrominance (C) and luminance (Y)
S VIDEO | signals. (Actual results depend on the television.) | |
IN | ||
|
8
RQT7700
Rear panel of this unit
S VIDEO cable
(not included)
SVIDEO OUT
