Signal type/data
LPCM/PPCM/GD/DTS/MP3/MPEG:
Signal type kHz (sampling frequency)/bit/ch (number of channels)
Example: 3/2 .1ch
.1: Low frequency effect
(not shown if there is no signal)
0:No surround
1:Mono surround
2:Stereo surround (left/right)
1:Center
2:Front left + Front right
3:Front left + Front right + Center
It can be a while before playback starts if you change the audio of a Xvid disc.
PLAY SPEED
Change play speed
– from “x0.6” to “x1.4” (in
•Press [4/9] two times to continue normal playback.
•After you change the speed:
−Audio output will switch to
−Sampling frequency of 96 kHz is converted to 48 kHz.
REPEAT MODE
(Z 12, “Repeat playback”)
Except (still picture part) (SVCD only)
Press [OK] at the start and end points.
• To cancel, select “OFF”.
SUBTITLE
(with multiple subtitles) (SVCD only)
Select subtitle language
•For +R/+RW disc, a number display will replace the subtitles that cannot be shown.
(with subtitle on or off information)
ON ↔ OFF
ANGLE
(with multiple angles)
Select a video angle
DATE DISPLAY
Show the date of a picture
ON ↔ OFF
ROTATION
Rotate a picture (during pause)
0 ↔ 90 ↔ 180 ↔ 270
█Menu 2 (Video)
PICTURE MODE
NORMAL: Normal images.
CINEMA1: Mellows images and enhances details in dark scenes.
CINEMA2: Sharpens images and enhances details in dark scenes.
DYNAMIC: Enhances the contrast for powerful images.
ANIMATION: Suitable for animation.
ZOOM
Select zoom sizes
NORMAL, AUTO (), x2, x4
(during pause)
SOURCE SELECT
AUTO: Converts the Xvid content automatically.
INTERLACE: Select if the Xvid content was encoded in interlace format.
PROGRESSIVE: Select if the Xvid content was encoded
in progressive format.
█Menu 3 (Audio)
DIALOGUE ENHANCER
Make the dialogue in films easier to hear
(Dolby Digital, DTS,
(Dolby Digital,
ON ↔ OFF
RQT9952
15