Panasonic SC-VKX25 Clock and timers, External equipment, Setting the clock, Sleep timer, Play and record timer, Using the auxiliary input

Press [R, T] to set the start time. Press [OK].

Do steps 2 and 3 again to set the end time.

Clock and timers

Setting the clock

This is a 24-hour clock.1 Press [CLOCK/TIMER] to select “CLOCK”.2 Press [R, T] to set the time then press [OK].To check the timePress [CLOCK/TIMER].

Note:

Reset the clock regularly to maintain accuracy.

Sleep timer

The sleep timer switches off the system after the set time.Press [SLEEP] to select the setting (in minutes). To cancel, select “OFF”.SLEEP 30 → SLEEP 60 → SLEEP 90 → SLEEP120

OFF

To check the remaining timePress [SLEEP].

Note:

•The play timer and sleep timer or the record timer and sleep timer can be used together.

•The sleep timer always comes first. Be sure not to set an overlap of timers.

Play and record timer

(Except for Bluetooth® source)You can set the timer to come on at a certain time to:•Wake you up (play timer).•Record from the radio or the external equipment (record timer).Play timer and record timer cannot be used together.

Preparation

Set the clock.1 Press [CLOCK/TIMER] to select “#PLAY” or “#REC”.

2

3

4

5 Press [R, T] to select the source you want to play or record and then press [OK].

To start the timer1 Prepare the audio source.

Play timer	Prepare the music source you
	want to listen to (disc, USB, radio
	or external equipment) and set
	the volume.
Record timer	Connect the USB device to
		USB B	and tune to the radio
	station or select the external
	equipment.

2 Press and hold [#, –PLAY/REC] and then press the button again to select the setting.

TIMER OFF	Cancel the setting.
#PLAY ON	Start the play timer. “#PLAY” is
	shown.
#REC ON	Start the record timer. “#REC” is
	shown.

The system must be switched off for the timer to operate.To check the settings

Press [CLOCK/TIMER] to select “#PLAY” or “#REC”. In standby mode, press [CLOCK/TIMER] two times.

Note:

•The play timer starts at a low volume and increases gradually to the preset level.

•The record timer starts 30 seconds before the set time with the volume muted.•The timer comes on at the set time every day if the timer is on.

•If you switch off the system and switch on again while a timer is in operation, the timer will not stop at the end time.

External equipment

Preparation

•Disconnect the AC mains lead.•Switch off all equipment and read the appropriate operating instructions.

Using the auxiliary input

You can connect the TV and listen to the audio through this system.1 Connect the TV to this system.(Z 7, “Alternative connection to a TV”)2 Press [RADIO/AUX] to select “AUX 1”.

Note:

•You can also connect other equipment (such as Blu-ray Disc player, DVD recorder, VCR, etc.) to the AUX 1 terminal of this system.

•Sound distortion can occur when you use an adaptor.

RQT9952

19