1The original language designated on the disc is

selected.

2Input the applicable code from the “Language code

list” (Z 23).

3If the language selection for “AUDIO” is not available for the disc played, the subtitles in that language will be shown (if available on the disc).

“VIDEO” menu

TV ASPECT

Change the setting to suit your TV and preference. 16:9: Widescreen TV (16:9)

4:3PAN&SCAN: Regular aspect TV (4:3) The sides of the widescreen picture are cut off so it fills the screen (unless prohibited by the disc).

4:3LETTERBOX: Regular aspect TV (4:3) Widescreen picture is shown in the letterbox style.

TIME DELAY

When connected with an AV amplifier and Plasma TV, adjust if the audio is out of sync with the video.

0 ms

20 ms

40 ms

60 ms

80 ms

100 ms

 

 

 

NTSC DISC OUT

Change PAL 60 or NTSC output when you play NTSC discs.

NTSC: Output signals from NTSC discs remains as NTSC.

PAL60: NTSC discs can be viewed on PAL TV.

For the Middle East and South Africa

“PAL60” is the factory preset.

STILL MODE

Specify the type of picture shown when in pause mode.

AUTO

FIELD: The picture is not blurred, but the picture quality is lowered.

FRAME: Overall quality is high, but the picture is blurred.

“AUDIO” menu

DOLBY DIGITAL

BITSTREAM

PCM

DTS

BITSTREAM

PCM

For the Middle East and South Africa

MPEG

BITSTREAM

PCM

Select “BITSTREAM” when the equipment can decode the bitstream (digital form of multi-channel data). If not, select “PCM”. (If the bitstream output to the equipment without a decoder, there can be high levels of noise output that can do damage to your speakers and hearing.)

DYNAMIC RANGE

ON: Adjust for clarity even when the volume is low. The range between the lowest and the highest sound levels is compressed. Convenient for late night viewing. (Only works with Dolby Digital.)

OFF

“DISPLAY” menu

LANGUAGE

Select the language for the on-screen messages.

ENGLISH FRANÇAIS ESPAÑOL PУCCKИЙ

“OTHERS” menu

SLIDE SHOW TIME

To change the slideshow time. 1 SEC to 15 SEC (in 1-unit)

15 SEC to 60 SEC (in 5-unit)

60 SEC to 180 SEC (in 30-unit)

“3 SEC” is the factory preset.

EASY SETUP

SET: Shows the EASY SETUP settings.

DVD-VR/DATA

Select to play only DVD-VR or DATA format.

DVD-VR: To play video on DVD-R/RW.

DATA: To play data files on DVD-R/RW.

SCREEN DIMMER

This is to prevent burnt mark on the TV screen.

OFF

WAIT 5 MIN: If there is no operation for 5 minutes, the picture becomes grey. The TV screen will go back to the normal position when you do some operations. (This does not apply during video playback.)

DEFAULTS

This returns all values in the SETUP menus to the default settings.

RESET

The password screen is shown if “RATINGS”

(Z 20, “RATINGS”) is set. Input the same password and then press [OK], then switch off the system and switch on again.

RQT9952

21