Panasonic SDR-H200 Adjusting the LCD monitor, Setup Display style Screen display, Brightness

Setup

Display style	Screen display
[Y/M/D]	2007.DEC.15
[M/D/Y]	DEC.15.2007
[D/M/Y]	15.DEC.2007

≥The date and time function are driven by a built-in lithium battery.

≥Make sure to check the time before recording.

≥If the time display becomes [- -], the built-in lithium battery has run down. Use the following steps to charge the battery. When you turn on the power for the first time after charging, a message asking you to set the date and time will appear. Select [YES] and set the date and time.

To recharge the built-in lithium battery Connect the AC adaptor or attach the battery to the unit, and the built-in lithium battery will be recharged. Leave the unit as it is for approx. 24 hours and the battery will save the date and time for approx. 6 months. (Even if the OFF/ ON switch is set to OFF, the battery is still being recharged.)

Adjusting the LCD monitor

Adjusting the brightness and color level

1 Press the MENU button, then select [SETUP] # [LCD SET] #

[YES] and press the joystick.

MENU

2 Move the joystick up or down to select the item to be adjusted. Then, move the joystick left or right to make the adjustment.

The bar display moves.

[BRIGHTNESS]:

Brightness of the LCD monitor

[COLOR]:

Color level of the LCD monitor

≥When the LCD monitor is rotated by 180° towards the lens, the brightness and color level of the LCD monitor cannot be adjusted.

≥These settings will not affect the images actually recorded.

Increasing and decreasing the brightness of the entire LCD monitor

Press the POWER LCD PLUS button.

POWER LCD

PLUS

37

LSQT1190