Panasonic SDR-H200, SDR-H18 operating instructions About recovery, 108

Others

CHANGE TO MANUAL
MODE.
CANCEL MAGICPIX MODE.	You are attempting to use a function that cannot be used
	simultaneously.
TURN OFF THE VIDEO
LIGHT.
SHAKE OR DROP HAS
BEEN DETECTED. FAILED	The unit has detected that it is being dropped so the operation has
OPERATION. PLEASE	stopped.
WAIT A WHILE.
CANNOT OPERATE.	The internal temperature of this unit is high so it cannot be operated.
TEMPERATURE IS HIGH.
	Turn off the power, wait until the temperature falls and then turn on
PLEASE TURN OFF AND
	the power again.
WAIT A WHILE.
CANNOT OPERATE DUE	The internal temperature of this unit is extremely low so it cannot be
	operated.
TO LOW TEMPERATURE.	If “Please Wait.” appears after this message, wait a while without
	turning the unit off. It may take time until the unit can be used.
PUSH THE RESET	An irregularity in the unit has been detected. Remove the SD card
SWITCH.	then press the RESET button to restart the unit. (l 116)
DISCONNECT USB	The unit cannot correctly establish the connection to the computer
	or printer. Disconnect and reconnect the USB cable and then select
CABLE.
	the desired USB function again.
CANNOT OPERATE WHILE	The unit’s power cannot be turned off when the unit is connected to
CONNECTED TO
	the computer.
COMPUTER.

About recovery

It is possible that the system cannot complete writing of a file normally when, for example, power is turned off for some reason during recording or editing.

If faulty management information is found when the HDD or a card is accessed, one of the following messages may appear. Be sure to follow the messages. (Repairing may take time depending on the error.)

HDD ERROR DETECTED. NOW REPAIRING DATA.

CARD ERROR DETECTED. NOW REPAIRING DATA.

≥When you repair the data, use a battery with sufficient battery power or the AC adaptor. Even if the power is turned off without repairing the data, you can repair the data when you turn the power on again.

≥Depending on the condition of the data, it may not be possible to completely repair the data.

≥Do not repair a card that has been recorded on another device. This may cause the loss of data or the card.

108

LSQT1190