NCR NCR7454 manual NCR 7454-3xxx WinXPe Operating System Recovery Software, Lpin D370-0565-0100

4-12 Chapter 4: Operating System Recovery

NCR 7454-3xxx WinXPe Operating System Recovery Software

(Version 02.02.00.01)

(LPIN: D370-0565-0100)

Note: This product should only be used on 7454 terminals with a

Microsoft Windows XPe license.

7454-3xxx Windows XPe Operating System Recovery Software provides the means of restoring the operating system to the hard disk of a 7454 POS terminal. The bootstrap program (di_intel.bsd) and disk recovery boot image (di_intel.bid) are downloaded to the target terminal over the network and restore the hard disk to the preinstalled state as shipped from the factory. This enables installation of the following software:

•Microsoft Windows XPe w/ SP1

•SMI Lynx EM/EM+ Video driver (6.13.10.228)

•Intel 82559 Ethernet LAN drivers (6.01.03.0000)

•NCRSYSM driver (3.0.4.12)

•MicroTouch drivers (5.64)

The following drivers are not installed automatically, but can be installed from their respective locations (Readme files exist in these locations, as well):

•	Backpack CD-ROM (4.0.100.1190)	C:\Install\Drivers\CDRom
•	Edgeport USB (2.20)	C:\Install\Drivers\USB
•	Inside Out Networks
	Watchport/V Camera (2.20)	C:\Install\Drivers\Camera