Chapter 2: Hardware Installation 2-25
Wall Mounting a Tilt Mount
To install the Tilt Mount on a flat vertical surface, use the K533 Wall
Mount Bracket Kit.
1.Secure the Wall Plate to the wall with lag screws (4) into the studs or with hardware of similar strength. The recommended viewing height for the terminal is 1.2 m (48") from the floor.
Wall Mount Adapter Plate
Release Lever
Wall Plate
16400
2.Install the Wall Mount Adapter Plate to the bottom of the terminal with screws (4).
3.Install the terminal to the Wall Plate. The bottom of the Wall Mount Adapter Plate has slots that mate to locking tabs on the Wall Plate.
4.Latch the Release Lever.
