NCR NCR7454 manual Enter the Computer Description Enter the Computer Name

Chapter 4: Operating System Recovery 4-5

18.Remove the CD during reboot for the OS to begin. When system is restored, reset the BIOS to normal defaults.

Completing the OS Installation (Win2000)

The system automatically reboots when the image recovery is complete and starts the software installation. This installation also installs most of the additional software and drivers that are included in the disk image. Complete the installation as follows.

1.After the terminal reboots, it will perform a disk check and then continue with the Windows 2000 installation.

2.Enter the User Name and Organization.

3.Enter the Computer Name for the client.

4.Enter the Administrator’s Account Password (optional)

5.When prompted, press Finish to reboot the client.

6.Login when prompted.

7.Run the MicroTouch screen calibration from the Desktop icon.

Completing the OS Installation (WinXPe)

The system automatically reboots when the image recovery is complete and starts the software installation. This installation also installs most of the additional software and drivers that are included in the disk image. Complete the installation as follows.

1.Click the Admin button to login as Administrator.

2.Read the EULA (End-User License Agreement) information in the DOS window, then type EXIT and press Enter to close the DOS window.

3.Start the Network Setup Wizard.

4.Select options to identify the network information for the terminal environment.

5.Enter the Computer Description.

6.Enter the Computer Name.