NCR NCR7454 manual PCI Expansion Header, IDE Header, Audio, Magnetic Stripe Reader

Models: NCR7454

1 174
Download 174 pages 15.99 Kb
Page 30
Image 30

1-14 Chapter 1: Product Overview

PCI Expansion Header

A single expansion header is provided to support optional features, such as the PCMCIA for Wireless LAN Board. This board supports two Type 2 or one Type 3 PCMCIA type cards.

IDE Header

A standard IDE header is provided to support the 2.5" hard disk drive or the 64 MB and 256 MB compact flash.

Audio

The base unit has Sound Blaster-compatible audio. Wave table synthesis is not supported. FM synthesis and MIDI are supported in the hardware, but requires software driver support to function.

Higher quality integrated stereo speakers may be added as an option to the terminal. The amplifier is located on the Processor Board; the speaker output is provided on a header that receives the harness from the speaker module. In addition, a Line Out is provided on a 3.5mm stereo jack that permits connection of external amplified speakers.

The integrated stereo speakers, or an amplifier connected to Line Out, must be used in order to play Sound Blaster (audio subsystem) audio. However, an internal EUI speaker provides PC speaker functionality (beeps and tones) for all configurations.

The volume control can be set during system configuration.

The PC speaker sounds (such as beeps and touch clicks) are directed into the audio subsystem and are audible if speakers are connected.

Magnetic Stripe Reader

A 3-track MSR head is available as an option. The ISO and JIS card format is supported.

When card data is read, an interrupt is generated. A software device driver for the MSR must be loaded to enable the application to process the data.

Page 30
Image 30
NCR NCR7454 manual PCI Expansion Header, IDE Header, Audio, Magnetic Stripe Reader