NCR NCR7454 manual Ethernet 10/100Base-T LAN Communications

1-10 Chapter 1: Product Overview

•Lynx Family Control Panel Specification 1.2 on the NCR 74xx Base System and Client Third party Drivers CD-ROM (Product ID:

D370-0111-0100) or in the video.exe self-extracting Video Drivers file on the Retail Solutions Specific Third Party Products Drivers and

Patches web site at:

http://www.ncr..com/support/support_drivers_patches.asp?Class=retail_TPP.

•Retail Customer Information Display User’s Guide (BD20-1431-B) on the NCR Information Products web site at: http://www.info.ncr.com/eHome.cfm

Ethernet 10/100Base-T LAN Communications

The terminal contains a 10/100Base-T Ethernet PCI connection. Ethernet 100Base-T is also known as Fast Ethernet. The Boot ROM for diskless boot functionality is included in the 1 MB system ROM. The hardware is compatible with the TCP/IP, DHCP, and TFTP protocols required for remote boot of the platform. Appropriate software must be used to enable each protocol used over the Ethernet link.

The terminal may be connected to either a 10 Mbps or 100 Mbps Ethernet connection. The hardware automatically selects the correct speed (if enabled by software to do so).

The LAN hardware supports wakeup packet capability as defined in the Device Class Power Management Specification, Network Device Class (available from the Microsoft® Web site).

When the platform is in the Soft OFF state (refer to Advanced Power Management section that follows), receipt of a Wakeup Packet on the LAN can return the system to the ON state, if this feature is enabled by software.

Note: Due to limitations of the LAN controller and the OS, all features described in the Network Device Class specification may not be available.