Panasonic SL-PR300 operating instructions Special Recording Edit Operations

Special Recording Edit Operations

4 Press the SET button (main unit/remote control).

•“ERASE (start track) – (last track)?” is flashed in the informa- tion display. (Initially, the start track and last track are both the last track number recorded on the CD-RW.)

•Press the CANCEL button (main unit/remote control) if you do not wish to perform this procedure.

5 If needed, use the MULTI JOG control or press the P/p(menu) button on the remote control to select the number of tracks you want to erase preceding the last track.

•Please note that all tracks following the start track will be erased. For example, when track 8 on an 11 track CD-RW is assigned as the start track, tracks 8, 9, 10, and 11 will be erased.

6 Press the SET button (main unit/remote control).

•“ERASE TRACK” is flashed in the information display, the selected tracks are erased, and the normal display is shown when erasing has been completed.

•Each track that was erased is cleared from the music calendar.

•Tracks can only be erased starting from the last track recorded on a disc.

Notes

•Once a track is erased, the recording cannot be restored.

•Do not turn the power off, disconnect the AC power cord from the wall outlet or subject the unit to vibration during the erase operation. Doing so may ruin the CD-RW disc.

Erasing All Tracks (Disc Erase Function) (CD-RW only)

The Disc Erase function is used to erase the entire contents of the CD-RW. This unit uses a unique high-speed (2x) erasing function that is different from normal erasure procedures. Erasing is per- formed all the way through the disc’s TOC (Table of Contents). “ERASE DISC” flashes in the information display during the eras- ing process.

Note

•If the disc is damaged or there is disc related trouble, this func- tion may not be possible.

1

MULTI JOG

3

COMPACT DISC RECORDER SL-PR300

REC LEVEL

POWER

OPEN /

DISC

–

+

CLOSE

SELECTOR

OPEN /

DISC 3

3

CLOSE

DISC 2

2

DIGITAL

CD

LINE

REC SELECTOR

PHONES

DISC 1

1

MIX BALANCE

MIN

MAX

LINE

CD

PLAY MODE

CD EDIT

CD REC

SYNCHRO

MENU

SET

CANCEL

FINALIZE

REC/

REC MUTE

2 4,5 CANCEL

DISC SELECTOR

CD1	CD2	CD3
CD REC	CD EDIT	FINALIZE DISPLAY

	1	2		3
	4	5		6
	7	8		9
	0	>10
	PLAY	REPEAT	CONTROL
	MODE		CD	CD-R/RW
3	•REC		FADE	SYNCHRO
	REC MUTE

SELECTOR	MENU	2
REC
	PITCH+	4,5
	SET
	PITCH–
PITCH 0	CANCEL	CANCEL
COMPACT DISC RECORDER
	RAK-PR300

1 Load the CD-RW to be erased in the CDR disc tray.

•The number of tracks and play time are shown in the informa- tion display.

2 When the unit is in the stop mode, press the MENU button (main unit/remote control).

3 Turn the MULTI JOG control or press the R/F

(menu) button on the remote control until “DISC ERASE” is shown in the information display.

4 Press the SET button (main unit/remote control).

•“ERASE DISC?” is shown in the information display.

•Press the CANCEL button (main unit/remote control) if you do not wish to perform this procedure.

5 Press the Set button (main unit/remote control).

•Full disc erasure takes a few minutes to perform. During the procedure, the length of the level meter is used to indicate approximately how much time is remaining until erasure is complete. When the erasure has been completed, the normal

display is shown.

RQT6087