Panasonic SL-PR300 Disc Dubbing, Select a disc and start playback, When recording completes

Recording onto CD-R/RW Discs

1 Select a disc and start playback.

Example: When planning to record a track on DISC1

1

2 Insert a recordable CD-R or CD-RW disc in the CDR disc tray.

• The disc is read.

3 While the disc is playing back the track you want to record or if that track is being paused, press CD REC (main unit/remote control).

Main Unit Remote Control

CD REC

CD REC

“1TR DUBBING” is shown in the information display.

•When a blank disc is in the CDR tray, “UPDATE OPC” is shown following “1TR DUBBING”.

When “ADD FINALIZE?” is shown in the information window:

•No response (no input) assumes that finalization is to be per- formed, or you can press the SET button (main unit/remote con- trol) to confirm that finalization is to be done. Press the CANCEL button (main unit/remote control) to keep the disc

unfinalized.

Note

•This message will be shown if the menu FINALIZE function setting is “ON”. The default setting is “OFF”.

The CD restarts playback from the beginning of the track and the CDR starts recording simultaneously.

•When a track is recorded, its digital signals are recorded in their original form. A new track mark is automatically placed at the beginning of the track being recorded.

When recording completes

“STOP DUBBING” flashes and recording automatically stops.

When recorded without canceling “ADD FINALIZE?“

“FINALIZE” is shown in the information window after recording is stopped and finalization is automatically performed.

To stop recording at any time

Press the CD or CDR Control STOP s button on the main unit or the s (stop) button on the remote control to end recording. The recording mode is released after “STOP DUBBING” is shown in the information display.

Notes

•There is no need to adjust the recording level when recording a digital signal.

•If the source CD being recorded from the 3-CD changer is itself a first-generation digital copy, digital recording cannot be per- formed. When this occurs, the recording type will switch from digital to analog automatically.

•Upon completion of recording, “STOP DUBBING” is shown in the information display. Always wait for the “STOP DUBBING” message to be cleared before proceeding with the next operation.

1Disc Dubbing

•You can make a complete copy of a CD that you want to record onto a CD-R/CD-RW disc. When recording a CD with song numbers but no silence between songs such as a live CD, for example, you can use the 1 DISC DUBBING feature to make a recording without any silence.

1 2 3

					MULTI JOG
	COMPACT DISC RECORDER SL-PR300			–	REC LEVEL
POWER	OPEN /	DISC			+
	CLOSE	SELECTOR	OPEN /
	DISC 3	3	CLOSE

	DISC 2	2
	DISC 1	DIGITAL	CD	LINE	REC SELECTOR
PHONES		1			MIX BALANCE

MIN	MAX							LINE	CD
		PLAY MODE	CD EDIT	CD REC	SYNCHRO	MENU	SET	CANCEL

				FINALIZE	REC/
					REC MUTE
1				3	4,5
1	DISC SELECTOR
	CD1	CD2	CD3
	CD REC	CD EDIT	FINALIZE	DISPLAY
	1		2	3
	4		5	6
	7		8	9
	0	>10
	PLAY	REPEAT	CONTROL
	MODE		CD	CD-R/RW
	•REC		FADE	SYNCHRO
	REC MUTE

1

4,5	PITCH+	MENU	3
	SELECTOR
	REC

SET

	PITCH–	3
PITCH 0	CANCEL

COMPACT DISC RECORDER

RAK-PR300

1 Select and stop the CD to be recorded.

Example: To record the CD loaded in tray DISC1.

• Only the selected CD is recorded.

1

2 Load a recordable CD-R or CD-RW disc into the CDR and close the tray.

• The disc is read.

3 Press the MENU button (main unit/remote control), and then turn the MULTI JOG control on the main unit or press the P or p button on the remote control until “1 DISC DUBBING” is shown in the information display.

4 Press the SET button.

“DUBING READY?” is shown in the information display.

• Only the selected CD is recorded.

5 Press the SET button.

RQT6087