Panasonic SL-PR300 operating instructions Load a recordable CD-R or CD-RW disc into the CDR

3,5

1 Perform steps 1 to 13 of the Timer Play (wake- up play) procedure. (see page 43)

2 When “PLAY” is flashing in the information display, turn the MULTI JOG control on the main unit to select “REC”.

Timer Operations

Timer Recording (Unattended Recording from a Broadcast Receiver or Other Source)

7									6	2,4
										MULTI JOG
	COMPACT DISC RECORDER SL-PR300									REC LEVEL
POWER			OPEN /	DISC						–	+
			CLOSE	SELECTOR					OPEN /
			DISC 3	3					CLOSE
			DISC 2	2
			DISC 1	DIGITAL	CD	LINE			REC SELECTOR
PHONES				1						MIX BALANCE
MIN MAX										LINE	CD
	PLAY MODE	CD EDIT	CD REC			SYNCHRO	MENU	SET	CANCEL
						FINALIZE			REC/
									REC MUTE

3 Press the SET button.

MULTI JOG

REC LEVEL

SET

– +

4 Turn the MULTI JOG control on the main unit within 30 seconds after step 3 to select the source to be recorded from.

5 Press the SET button.

MULTI JOG

REC LEVEL

SET

– +

6 Load a recordable CD-R or CD-RW disc into the CDR.

• The disc is read.

7 Set the power to standby mode.

• The present time is shown in the information display.

Notes

•Match the timer of the connected source with the unit’s setting.

•Recording starts at the programmed start time, and the power will be switched to back to the standby mode at the pro- grammed end time. (The unit power is turned on about two min- utes before the programmed start time.)

•When an operation is completed once using the Once Timer mode, the timer program is cleared.

•If digital signals are not received when timed recording starts using the DIGITAL IN setting, “UNLOCK” is shown in the information display and no signals will be recorded.

•When using the timer to record a digital satellite broadcast pro- gram, for instance, check to see if the broadcast station with the program you want to record is tuned in correctly before pro- gramming the timer start and end times.

RQT6087