11
2
1
4
Basic Functions

Printing images

1Insert a Memory Card. (l
ll
l10)
≥Images marked with the DPOF option will be printed. This feature
is usually found in the digital camera or other SD video devices.
This printer cannot be used to mark the desired photos using
DPOF.
≥If DPOF is not implemented, whole images are printed in order,
commercing from the last one captured .
2Hold down the Power Button [
] for about 2 seconds.
≥The Printer is turned on.
≥When the [ACCESS] Lamp goes off and the [PRINT] Lamp lights
up, the Printer is ready to print.
3To execute the four-picture print (4 of same image),
press the 4-Picture Mode Button [
].
≥The“ ”Lamp lights.
≥Each pressing of this button alternately switches the mode (one
picture or four pictures).
4Insert a sheet of paper with the [ ª/[1]/[4] ] mark side
down into the [PAPER IN 1] slot (Upper slot).
≥Make sure the paper is fed into the [PAPER IN 1] slot on the unit.
The Paper will then start to print.(If the Paper is not fed, push paper
lightly to begin paper feed process)
≥The paper is moved forward and backward several times and exits
from the Paper Exit Slot. The printed paper is then ready to be
removed from the Paper exit slot.
≥When the 4-picture mode is selected, the same four pictures are
printed equally on the quarterly divided sections of the paper.
≥Do not insert a sheet of paper into the Paper Exit Slot (lower
slot), or paper jam may occur.
5Repeat steps 3 and 4.
≥The [PRINT] Lamp goes off after the total number of sheets (the
specified number of sheets, if DPOF is implemented) all printed.
Stopping Printing
Press the Power Button
[
]
for about 2 seconds to stop printing
and turn off the power after the completion of current print job.
≥Please read the “
Precautions
” carefully. (l
ll
l19)
≥“DPOF”: Digital Print Order Format; a feature that allows the user to
mark photos that they wish to print. This feature is usually offered by
the digital camera or other SD video devices.
≥While the [ACCESS] Lamp is on, never take the card out or turn the
power off. Additionally, never add any oscillation or shock on the
device. This may cause damage to the memory card or the data
contained in the card.
≥Do not forcibly pull the Ink Film or paper. Do not allow fingerprints or
dust or water to contact the Ink Film or paper.
≥Do not forcibly pull out the paper while printing is in progress.
≥If the [ ] Lamp flashes, the battery will run down shortly. Recharge
the battery or plug the cord of the Printer into a wall outlet.
≥If the [ERROR] Lamp lights up or flashes, refer to “Error Lamp” on page
22.
≥When you insert a sheet of paper before the [PRINT] Lamp lights,
printing does not occur. Re-insert the paper after the [PRINT] Lamp
lights.