22
Error Lamp
The [ERROR] Lamps lights (or flashes) when the Printer cannot print or the battery cannot be charged. How the lamp lights
(flashes) indicates the following probable causes.
ªAbout this Printer
ªAbout the Battery
Status of lamp Probable cause
[ERROR] Lamp flashes.
There is no Ink Cassette. Insert the Ink Cassette.
There is no ink. Replace the Ink Cassette with a new one.
If the lamp still flashes after the above replacement, the printer
may be defective. Contact your nearest Panasonic dealer.
[PRINT] Lamp and [ERROR] Lamp flash
simultaneously.
Paper jam has occurred. Turn the power off and remove the
jammed paper.
If the jammed paper still remains after the removal of paper, the
printer may be defective. Contact your nearest Panasonic dealer.
[ACCESS] Lamp and [ERROR]Lamp flash
simultaneously.
There is no picture on the card. Use a card with images recorded
on it.
An incompatible card is being used. Insert a card that the SD
Mobile Printer can use.
[ERROR] Lamp and [PRINT] Lamp flash
simultaneously
.
[ERROR] Lamp lights.
This could indicate a number of suspected faults. If the lamp still
flashes after the reset of power, contact your nearest Panasonic
dealer.
Multi picture mode[ ] Lamp and [ERROR]
Lamp flash simultaneously.
Strong light has entered from the paper sliding slot. Such strong
light may cause malfunction. Face the printer in the other
direction.
[PRINT] Lamp lights and [ERROR] Lamp flashes.
The ambient temperature or that within the Printer is too high.
Wait until the temperature lowers.
Status of lamp Probable cause
[ ]Lamp flashes.
If those lamps are flashing while the power is turned off,the
battery is in charging. Wait until the completion of battery
charging.
If those lamps are flashing while the power is on, it indicates that
battery power is running out. Charge up the battery.
[ ]
Lamp and [ERROR] Lamp flash
simultaneously.
Detach the Battery and then reattach the Battery. If the lamp still
lights, the Printer or the battery may be defective. Contact your
nearest Panasonic dealer.
[ ]
Lamp flashes and [ERROR] Lamp lights.
The temperature of the Battery is extremely high. Wait until the
Battery has cooled off.