8
Power Suppl y
ªUsing an AC Adaptor
1Connect the DC Input Lead to the
[DC IN 4.9V] socket on the SD Mobile
Printer.
2Connect the AC main Lead to the AC
Adaptor and the AC Outlet.
Hold down the Power Button [ ] for about 2
seconds, and the printer is on.
ªUsing the Battery
1Attach the Battery 1 to the Battery
Holder on the SD Mobile Printer 1 and
slide it forward until it locks with a
click. 2
2Connect the AC mains Lead to the AC
Adaptor and to an AC Outlet. (Refer to
the description above.)
The [ON] Lamp flashes.
3Leave them as above until the Power
Lamp [ON] goes off.
When recharging is completed, the
[ON] Lamp
goes off.
Remove the AC Adaptor to use the Battery.
The SOCKET OUTLET SHALL BE
INSTALLED NEAR THE EQUIPMENT AND
SHALL BE EASILY ACCESSIBLE.
DC IN 4.9V
DC IN 4.9V
1
1
2
1
2