12
Inserting an SD Memory Car d/ MultiMediaCard
1Slide the Memory Card Door 1, and flip it
to open.
2Hold the Memory Card placing the cut off
corner 2 at the front with the label facing
up, and then insert it fully into the
Memory Card Slot horizontally.
≥When inserted correctly, a clicking noise will be
heard.
3Close the Memory Card Door 1.
≥After inserting the Memory Card, reverse the
procedure in step 1 to close the Memory Card
Door.
≥The actual time to read all the images from the
Memory Card will vary, depending on the number
and size of the photos.
≥While the [CARD ACCESS] sign is being displayed
in red, never take the card out or turn the power off.
≥If images cannot be recognized by this printer, “t” is
displayed on the index screen.
Turning the Power ON
1Install the battery or plug in the AC
adaptor (l
ll
l8) and hold down the [ ]
button for about 2 seconds.
≥The [ON] Lamp is turned on.
≥The LCD monitor is turned on 2 seconds after
turning on the [ON] Lamp.
≥The [CARD ACCESS] sign is displayed in red
while the images in the Memory Card are being
read.
≥If no operation is performed with the printer for
about 10 minutes (about 5 minutes when the
Memory Card inserted into the Printer contains
no images) when using the battery, it
automatically turns off the power. (l
ll
l44)
1
2
1
Í
1
2,3
1