Panasonic TC-P50G20 Location, AC cord connection, To attach, Do not use any other TV and displays

Accessories/Optional Accessory (Continued)

Attaching the pedestal to TV (continued)

Warning

Do not disassemble or modify the pedestal.

Otherwise the TV may fall over and become damaged, and personal injury may result.

Caution

Do not use any other TV and displays.

Otherwise the TV may fall over and become damaged, and personal injury may result.

Do not use the pedestal if it becomes warped or physically damaged.

If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic Dealer immediately.

During set-up, make sure that all screws are securely tightened.

If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.

Location

Adjust the plasma panel to your desired angle.

a

Note

(View from above)		TC-P50G20
c		a: 11.0 ” (277 mm)
		b: 17.5 ” (443 mm)
c	Center of the	c: 10°
	rotation.

b

Ensure that the pedestal does not hang over the edge of the base even if the TV swivels to the full rotation range. Do not place any objects or hands within the full rotation range.

AC cord connection

To attach To remove

Insert it firmly until the tabs on both sides click into place.

Keep pushing both sides until they snap and pull.

Reference of connection

Antenna terminal	Pin terminals	HDMI terminal
	red blue green
	green
Firmly tighten by hand.	Match colors of plugs and terminals.	Insert firmly.
	Insert firmly.

10