Basic Controls
Remote Control Transmitter
R button (see page 17)
Press the R button to return to previous menu screen.
Standby (ON / OFF) button
The Plasma Display must first be plugged into the wall outlet and turned on at the power switch (see page 13).
Press ON to turn the Plasma Display On, from Standby mode. Press OFF to turn the Plasma Display Off to Standby mode.
N button
(see page 20, 21, 24, 25, 26)
POSITION buttons
ACTION button 
Press to make selections.
POS. /SIZE button
(see page 20)
PICTURE button
(see page 24)
INPUT button
(INPUT1, INPUT2, INPUT3 and PC selection)
Press to select INPUT1, INPUT2, INPUT3 and PC input SLOTS sequentially. (see page 18)
Sound mute On / Off
(see page 27)
Numeric buttons
(see page 37)
ASPECT button
Press to adjust the aspect. (see page 19)
MULTI Window buttons
(see page 22)
Digital Zoom (see page 28)
Remote ID lock (see page 37)
Status button
Press the “Status” button to display the current system status.
1Input label
2Aspect mode (see page 19)
3 Off timer
The off timer indicator is displayed only when the off timer has been set.
PC | 1 |
NORMAL | 2 |
| |
OFF TIMER 90 | 3 |
SET UP button (see page 16, 17)
SOUND button (see page 26)
DIRECT INPUT buttons
Press the INPUT “1”, “2”, “3” or “PC” input mode selection button to select the INPUT mode. (see page 18)
This button is used to switch directly to INPUT mode.
Channel Adjustment
This button cannot be used for this model.
Volume Adjustment
Press the Volume Up “+” or Down
OFF TIMER button
The Plasma Display can be preset to switch to
30 60 90
0
When three minutes remain, “OFF TIMER 3” will flash.
The off timer is cancelled if a power interruption occurs.
SURROUND button (see page 27) The surround setting switches on and off each time the SURROUND button is pressed.
The benefits of surround sound are enormous. You can be completely enveloped in sound; just as if you were at a concert hall or cinema.
15
