Initial selections | Panasonic TH-103PF10UK specs

Initial selections

Selecting the input signal

Select the input signals to be connected by installing the optional Terminal Boards.

Press to select the input signal to be played back from the equipment which has been connected to the Plasma Display.

Input signals will change as follows:

INPUT1 INPUT2A INPUT2B INPUT3 PC

SLOT2 is for dual input so that you can select INPUT2A or

INPUT2B for INPUT2.

INPUT2A : HDMI signal terminal in SLOT2

INPUT2B : HDMI signal terminal in SLOT2

Press the INPUT “1”, “2”, “3” or “PC” input mode selection button to select the INPUT mode.

Press to switch the input mode between INPUT2A and INPUT2B.

Notes:

•Selecting is also possible by pressing the INPUT button on the unit.

•Input terminal will not be selected if the terminal board is not installed into the SLOT.

•Select to match the signals from the source connected to the component/RGB input terminals. (see page 40)

•In 2 screen display, the same input mode cannot be selected for the main picture and sub picture.

•Image retention (image lag) may occur on the plasma display panel when a still picture is kept on the panel for an extended period. The function that darkens the screen slightly is activated to prevent image retention (see page 51), but this function is not the perfect solution to image retention.

ENTER/

+ /

VOL

- /

MENU

INPUT

Selecting the On-Screen Menu Language

Press to display the SET UP menu. Press to select OSD LANGUAGE.

Press to select your preferred language.

Selectable languages

English(UK)

Deutsch

Français

Italiano

Español

ENGLISH(US)

.......(Chinese)

.......(Japanese)

Русский .......(Russian)

SET UP

1/2

SIGNAL

COMPONENT/RGB-IN SELECT

	RGB

INPUT LABEL	PC

POWER SAVE	OFF

STANDBY SAVE	OFF

POWER MANAGEMENT	OFF

AUTO POWER OFF	OFF

OSD LANGUAGE	ENGLISH (US)

18

Image 18

Panasonic TH-103PF10UK manual Initial selections, Selecting the input signal, Selecting the On-Screen Menu Language

Contents

Model No. TH-103PF10UK High Deﬁnition Plasma DisplayOperating Instructions English Risk of Electric Shock Do not Open Important Safety Instructions Table of Contents FCC Caution Canadian NoticeTrademark Credits Safety Precautions When using the Plasma Display Setup MaintenanceSafety Precautions / Maintenance AC Power Supply Cord Accessories Accessories SuppliedRemote Control Batteries Close ConnectionsAudio OUT Terminals connection Open Signal Names for Mini D-sub 15P Connector PC Input Terminals connectionConnections Communication parameters CommandSerial Terminals connection Basic format for control data DVD Hdmi connectionComponent / RGB connection DTV-STB Connecting the plug to the Wall Outlet Power on / OFFConnecting the AC cord plug to the Plasma Display Right side surface Basic Controls Basic Controls On-Screen Menu Displays Picture SetupSettings Advanced Power on Time Power OFF Time On-Screen Menu DisplaysComponent Selecting the On-Screen Menu Language Selecting the input signalInitial selections INPUT1 INPUT2A INPUT2B INPUT3 PC During Multi PIP Operations Normal FullPicture Explanation Press to adjust POS. /SIZE Adjusting POS. /SIZESize / DOT Clock / Clock Phase / 11 Pixel Mode During COMPONENT, RGB and PC input signal Adjusting POS. /SIZE Longer than 5 seconds. Press to change input signal Multi PIP Advanced PIP Off Sets normal two screen display modeOn Sets Advanced PIP mode Press to conﬁrm Dynamic Picture AdjustmentsStandard Cinema Advanced Settings Picture Adjustments MID Sound AdjustmentBass Treble Surround Sound AdjustmentSDI Sound Output Mute Select the area of the image to be enlarged Digital ZoomDisplay the operation guide Select the magniﬁcation required for the enlarged display Press to set up DAY or Present Time of DAY Present Time SetupPresent Time Setup Button Forward SET UP Timer Display the SET UP Timer Screen Press to selectPower on Time / Power OFF Time Screensaver For preventing image retention Mode selectionStart setting Negative / Scroll selection Setup of Screensaver Time Reduces screen image retentionScreensaver For preventing image retention Side BAR Adjust OFF Dark MID BrightPress to exit from Screensaver Reduces power consumption Customizing the Input labelsAddition sign Selected Input If you set Multi Display Setup to on SET UP for Multi DisplayHow to setup Multi Display Portrait Setup will be unavailable SET UP for Multi Display Press to select Seam Hides Video Press to select OFF, onDisplay Number locations for each arrangement Examples ID Cancellation ID Remote Control FunctionID remote control button operation AI-Control SET UP for Portrait How to setup PortraitPress to select Seam Hides Video Viewing Area Location Set a mode of image division for Portrait functionLocation Undisplayed area 48 dots 3D Y/C Filter For Ntsc AV images SET UP for Input SignalsComponent / RGB in Select Component RGB Video NR / Block NR / Mosquito NR SET UP for Input SignalsPress Action button Press to exit from adjust mode Refresh Rate Color System / Panasonic Auto PulldownColor System FREQ. kHz / V-FREQ. Hz Setting RGB sync signalSync Displays the H Horizontal / V Vertical frequencies Options Adjustments Options Adjustments Off Nullify all the settings adjusted Studio W/B When Disable is set, the Off-timer is cancelledEnable ID remote control functions Sets the color temperature for TV studio Rotate Off Does not rotate the image This functions when display is turned onNormalization Rotates the image 180 degrees Weekly Command Timer Time Set the time to execute a command program Press to select a command numberPress to select Time / Command Press to set each item Shipping condition Symptoms Check TroubleshootingSymptoms Checks Plasma Display panel COMPONENT/RGB/PC/VIDEO input signals MHz Active pixels Pixels Active lines Lines COMPONENT/RGB/PC/VIDEO input signalsVideo input Hdmi VGA60 Command list of Weekly Command Timer Speciﬁcations Limits and Exclusions Limited Warranty Statement Panasonic Canada Inc Memo Memo Executive Ofﬁce Customer’s RecordPanasonic Professional Display Company Panasonic Canada Inc