Panasonic TH-32LHD7UX manual Adjusting Picture Position / Size, Clock Phase, RGB/PC in mode

Adjusting PICTURE POSITION / SIZE

1	PICTURE
	POS. /SIZE
2		Press to display the PICTURE POS. /SIZE menu.
		Press to select H-POS / H-SIZE / V-POS / V-SIZE /
		CLOCK PHASE.

3 Press to adjust POS. / SIZE.

4 Press to exit from adjust mode.R

Notes:

•Adjustment details are memorized separately for different input signal formats (Adjustments for component signals are memorized for 525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 1125 (1080) / 60i · 50i · 24p · 25p · 30p · 24sF, 1250 (1080) / 50i, 750 (720) / 60p · 50p each, and RGB/PC/DVI signals are memorized for each frequency.)

•If a “Cue” or “Rew” signal from a VCR or DVD player is received, the picture position will shift up or down. This picture position movement cannot be controlled by the PICTURE POS. / SIZE function.

•If adjusting the PICTURE V-POS / V-SIZE in Panasonic AUTO with FULL mode, the adjustment is not memorized. When exiting the mode, the screen will return to a former adjustment.

INPUT

SURROUND

VOL

NR

PICTURE	SOUND	SET UP
MULTI		ZOOM
PIP	SWAP SELECT MOVE
PICTURE
POS. /SIZE		ASPECT
PC		OFF TIMER

During “VIDEO (S VIDEO)”, “COMPONENT” and “DVI” input signal.

PICTURE POS. /SIZE

NORMALIZE NORMAL

H-POS

H-SIZE

V-POS

V-SIZE

During “RGB / PC” input signal.

PICTURE POS. /SIZE

NORMALIZE NORMAL

H-POS

H-SIZE

V-POS

V-SIZE

CLOCK PHASE

H-POSAdjust the horizontal position. H-SIZEAdjust the horizontal size.

V-POSAdjust the vertical position. V-SIZEAdjust the vertical size.

CLOCK PHASE	Eliminate the flickering and distortion.
(RGB/PC in mode)

Helpful Hint ( N /

NORMALIZE

Normalization)

While the PICTURE POS. / SIZE display is active, if either the N button on the remote control is pressed at any time or the ACTION () button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.

19