Panasonic TH 42PS9UK, TH-37PH9UK, TH 42PH9UK Aspect Controls, Normal Zoom Full, Normal Full

ASPECT Controls

The Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture.

Press repeatedly to move through the aspect options:

		NORMAL	ZOOM	FULL
[from the unit]		Panasonic AUTO		JUST
	The aspect mode changes each time the ENTER button
	is pressed.
INPUT MENU -/ VOL +/ ENTER/
[During MULTI PIP Operations]		NORMAL	FULL
• Picture and Picture, Picture in Picture :
• Others	: Aspect switching is not possible.

Notes:

• For PC signal input, the mode switches between “NORMAL”, “ZOOM” and “FULL” only.

•For a 1125 (1080) / 60i · 50i · 24p · 25p · 30p · 24sF, 1250 (1080) / 50i, 750 (720) / 60p · 50p signal input, the mode is set to “FULL” mode, and switching is not possible.

•Panasonic AUTO can be selected only during Video signal input.

•The aspect mode is memorized separately for each input terminal.

Mode		Picture		Explanation
	4			NORMAL will display a 4:3 picture at its standard 4:3 size.
	NORMAL
NORMAL		3
	4		16	ZOOM mode magnifies the central section of the picture.
			ZOOM
ZOOM		3	9
	4		16	FULL will display the picture at its maximum size but with slight
			FULL	elongation.
FULL		3	9
	4		16	JUST mode will display a 4:3 picture at its maximum size but with aspect
			JUST	correction applied to the center of the screen so that elongation is only
JUST		3	9	apparent at the left and right edges of the screen. The size of the picture
				will depend on the original signal.
	4		16	The display will automatically become enlarged (depending on the
			Panasonic AUTO	picture source), allowing you to view the picture at its maximum size.
		3	9	Notes:
				• Panasonic AUTO mode is designed to automatically adjust the aspect
	For an elongated image		Image is expanded	ratio to handle a mix of 16:9 and 4:3 program material. Certain 4:3
Panasonic				program material, such as stock market data screens, may occasionally
	4		Changes in	cause the image size to change unexpectedly. When viewing such
AUTO
			accordance with the	programs, it is recommended that the ASPECT be set to NORMAL.
		3	Panasonic AUTO	• If adjusting the PICTURE V-POS/V-SIZE in Panasonic AUTO with FULL
			mode setting (see
				mode, the adjustment is not memorized. When exiting the mode, the
			page 39).
				screen will return to a former adjustment.
	For a 4:3 image
				• Panasonic AUTO can not be selected while TY-FB9BD (optional BNC
				Dual Video Terminal Board) is installed.

Note: Do not allow the picture to be displayed in NORMAL mode for an extended period, as this can cause a permanent after-image to remain on the Plasma Display Panel.

19