Maintenance, Setup, AC Power Supply Cord

Safety Precautions / Maintenance

WARNING

Setup

Do not place the Plasma Display on sloped or unstable surfaces.

• The Plasma Display may fall off or tip over.

Do not place any objects on top of the Plasma Display.

•If water spills onto the Plasma Display or foreign objects get inside it, a short-circuit may occur which could result in ﬁre or electric shock. If any foreign objects get inside the Plasma Display, please consult an Authorized Service Center.

Do not cover the ventilation holes.

•Doing so may cause the Plasma Display to overheat, which can cause fire or damage to the Plasma Display.

If using the pedestal (optional accessory), leave a space of 3 15/16” (10 cm) or more at the top, left and right, 2 3/8” (6 cm) or more at the bottom, and 2 3/4” (7 cm) or more at the rear. If using some other setting-up method, leave a space of 3 15/16” (10 cm) or more at the top, bottom, left and right, and 2 3/4” (7 cm) or more at the rear.

AC Power Supply Cord

The Plasma Display is designed to operate on 120 V AC, 50/60 Hz.

Securely insert the power cord plug as far as it will go.

•If the plug is not fully inserted, heat may be generated which could cause ﬁre. If the plug is damaged or the wall socket plate is loose, they should not be used.

Do not handle the power cord plug with wet hands.

• Doing so may cause electric shocks.

Do not do anything that might damage the power cable. When disconnecting the power cable, hold the plug, not the cable.

•Do not make any modiﬁcations, place heavy objects on, place near hot objects, heat, bend, twist or forcefully pull the power cable. Doing so may cause damage to the power cable which can cause ﬁre or electric shock. If damage to the cable is suspected, have it repaired at an Authorized Service Center.

If the Plasma Display will not be used for a long period of time, unplug the power cord from the wall outlet.

If problems occur during use

If a problem occurs (such as no picture or no sound), or if smoke or an abnormal odor is detected from the Plasma Display, unplug the power cord immediately.

•Continuous use of the Display under these conditions might cause ﬁre or permanent damage to the unit. Have the Display evaluated at an Authorized Service Center. Services to the Display by any unauthorized personnel are strongly discouraged due to its high voltage dangerous nature.

If water or foreign objects get inside the Plasma Display, if the Plasma Display is dropped, or if the cabinet becomes damaged, disconnect the power cord plug immediately.

•A short may occur, which could cause ﬁre. Contact an Authorized Service Center for any repairs that need to be made.

Maintenance

The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lint-free cloth.

•If the surface is particularly dirty, wipe with a soft, lint-free cloth which has been soaked in pure water or water to which a small amount of neutral detergent has been added, and then wipe it evenly with a dry cloth of the same type until the surface is dry.

•Do not scratch or hit the surface of the panel with ﬁngernails or other hard objects, otherwise the surface may become damaged. Furthermore, avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the surface may be adversely affected.

If the cabinet becomes dirty, wipe it with a soft, dry cloth.

•If the cabinet is particularly dirty, soak the cloth in water to which a small amount of neutral detergent has been added and then wring the cloth dry. Use this cloth to wipe the cabinet, and then wipe it dry with a dry cloth.

•Do not allow any detergent to come into direct contact with the surface of the Plasma Display. If water droplets get inside the unit, operating problems may result.

•Avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the cabinet surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long periods in contact with articles made from rubber or PVC.

TH 42PS9UK, TH-37PH9UK, TH 42PH9UK specifications

The Panasonic TH-42PH9UK, TH-37PH9UK, and TH-42PS9UK represent a series of plasma display panels that cater to both home entertainment and professional environments. These models, known for their superior image quality and robust feature set, have made a significant impact in the realm of high-definition viewing.

The TH-42PH9UK and TH-37PH9UK models are particularly renowned for their rich color reproduction and wide viewing angles, thanks to the advanced plasma technology. The 42-inch model boasts a resolution of 1024 x 768 pixels, providing a vibrant display with deep blacks and remarkable contrast ratios. The TH-37PH9UK, with a slightly smaller 37-inch screen, retains these qualities, making it an excellent choice for smaller spaces while still delivering an impressive viewing experience.

Both models utilize Panasonic's NeoPDP technology, which enhances picture quality and energy efficiency. This innovation results in improved brightness and lower power consumption, making the displays suitable for long viewing sessions. Additionally, the TH-42PS9UK model also utilizes this technology while providing a step up in terms of video processing capabilities, enabling smoother motion handling and enhanced detail in fast-paced scenes.

One of the standout features across these models is their versatile connectivity options. Each panel is equipped with multiple HDMI inputs and component video connections, making it easy to connect various devices such as Blu-ray players, gaming consoles, and cable boxes. Furthermore, the inclusion of VGA inputs allows for seamless integration with computers for presentations or high-quality content sharing.

In terms of design, Panasonic has ensured that these displays have a sleek and modern aesthetic that fits well in any environment. The bezels are slim, and the overall design is understated, allowing the image quality to take center stage. Moreover, these models are built with durability in mind, featuring robust components that promise longevity and reliability.

The TH-42PH9UK, TH-37PH9UK, and TH-42PS9UK series are not just about traditional television viewing; they also lend themselves well to commercial applications. Their high brightness and sophisticated image processing make them ideal for signage, advertising, and gaming setups.

Overall, these Panasonic plasma displays combine cutting-edge technology with user-friendly features, making them an excellent choice for both entertainment and professional use. With their striking image quality, energy efficiency, and versatile connectivity, they continue to be a compelling option for anyone seeking a high-performance display.

Panasonic TH 42PS9UK Safety Precautions / Maintenance, Setup, AC Power Supply Cord

Models: TH 42PS9UK TH-37PH9UK TH 42PH9UK