Panasonic TH-42PHD8UK ASPECT Controls, Mode, Picture, Explanation, Normal, Zoom, Full, Just, Auto

ASPECT Controls

The Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture.

Press repeatedly to move through the aspect options:

		NORMAL	ZOOM	FULL
[from the unit]		Panasonic AUTO		JUST
	The aspect mode changes each time the ENTER button
	is pressed.
INPUT MENU -/ VOL +/ ENTER/
[During MULTI PIP Operations]		NORMAL	FULL
• Picture and Picture, Picture in Picture :
• Others	: Aspect switching is not possible.

Notes:

• For PC signal input, the mode switches between “NORMAL”, “ZOOM” and “FULL” only.

•For a 1125 (1080) / 60i · 50i · 24p · 25p · 30p · 24sF, 1250 (1080) / 50i, 750 (720) / 60p · 50p signal input, the mode is set to “FULL” mode, and switching is not possible.

•Panasonic AUTO can be selected only during Video signal input.

•The aspect mode is memorized separately for each input terminal.

Mode	Picture		Explanation
	4		NORMAL will display a 4:3 picture at its standard 4:3 size.
	NORMAL
NORMAL	3
	4	16	ZOOM mode magnifies the central section of the picture.
		ZOOM
ZOOM	3	9
	4	16	FULL will display the picture at its maximum size but with slight
		FULL	elongation.
FULL	3	9
	4	16	JUST mode will display a 4:3 picture at its maximum size but with aspect
		JUST	correction applied to the center of the screen so that elongation is only
JUST	3	9	apparent at the left and right edges of the screen. The size of the picture
			will depend on the original signal.
	4	16	The display will automatically become enlarged (depending on the
		Panasonic AUTO	picture source), allowing you to view the picture at its maximum size.
	3	9	Notes:
			• Panasonic AUTO mode is designed to automatically adjust the aspect
	For an elongated image	Image is expanded	ratio to handle a mix of 16:9 and 4:3 program material. Certain 4:3
Panasonic			program material, such as stock market data screens, may occasionally
AUTO	4	Changes in	cause the image size to change unexpectedly. When viewing such
		accordance with the	programs, it is recommended that the ASPECT be set to NORMAL.
	3	Panasonic AUTO	• If adjusting the PICTURE V-POS/V-SIZE in Panasonic AUTO with FULL
		mode setting (see	mode, the adjustment is not memorized. When exiting the mode, the
		page 37).	screen will return to a former adjustment.
	For a 4:3 image

Note: Do not allow the picture to be displayed in NORMAL mode for an extended period, as this can cause a permanent after-image to remain on the Plasma Display Panel.

19