SET UP for Input Signals
COLOR SYSTEM / Panasonic AUTO
Select SIGNAL from the “SET UP” menu during VIDEO (S VIDEO) input | SET UP | 1/2 | |
signal mode.(“SIGNAL [VIDEO]” menu is displayed.) |
|
| |
| SIGNAL |
| |
Press to select the “COLOR SYSTEM” or “Panasonic | |||
| RGB | ||
AUTO”. | INPUT LABEL | PC | |
| |||
| POWER SAVE | OFF | |
Press to select each function. | STANDBY SAVE | OFF | |
POWER MANAGEMENT | OFF | ||
| AUTO POWER OFF | OFF | |
If the image becomes unstable: | OSD LANGUAGE | ENGLISH (US) | |
With the system set on Auto, under conditions of low | Press ACTION ( ) button | ||
level or noisy input signals the image may in rare | |||
|
| ||
cases become unstable. Should this occur, set the | SIGNAL | [ VIDEO ] | |
system to match the format of the input signal. | 3D Y/C FILTER (NTSC) | ON | |
| |||
| COLOR SYSTEM | AUTO | |
| 3 : 2 PULLDOWN | OFF | |
| Panasonic AUTO (4 : 3) | NORMAL | |
| VIDEO NR | OFF | |
Mode |
|
| Function |
|
|
COLOR SYSTEM | Set the color system to match the input signal. If set to “AUTO”, the color system is determined | ||||
| automatically. |
|
|
|
|
| AUTO | PAL | SECAM | M.NTSC | NTSC |
|
| ||||
Panasonic AUTO | Set to “NORMAL” to view 4:3 images in an unchanged format when Panasonic AUTO is | ||||
(4 : 3 ) | selected. If you would like to view 4:3 images in Just format, set to “JUST”. | ||||
3:2 PULLDOWN / VIDEO NR
3:2 PULLDOWN: When ON, the display attempts to reproduce a more natural interpretation of sources such as movie
pictures, which are recorded at 24 frames per second.1/2 If the picture is not stable, turn the setting to OFF.
Note: |
|
|
|
SIGNAL |
|
| |
|
|
| |
When ON, this setting only affects the following signal input: | |||
|
| RGB | |
• NTSC / PAL signal input during “VIDEO (S VIDEO)” input signal. |
|
| |
|
|
| |
INPUT LABEL |
| PC | |
• 525i(480i) 625i(575i), 1125(1080)/60i signal input during “COMPONENT” input signal. |
|
|
|
POWER SAVE |
| OFF | |
|
|
|
|
| STANDBY SAVE |
| OFF |
|
|
|
|
VIDEO NR: Automatically reduces unwanted picture noise. | POWER MANAGEMENT |
| OFF |
|
|
| |
AUTO POWER OFF |
| OFF | |
Note: |
|
|
|
OSD LANGUAGE | ENGLISH (US) | ||
VIDEO NR cannot be adjusted while a PC signal is being applied. | Press ACTION ( ) button |
|
1
2
Press to select 3:2 |
| SIGNAL | [ VIDEO ] | |
PULLDOWN or VIDEO NR. |
|
|
|
|
| 3D Y/C FILTER (NTSC) | ON |
| |
Press to set ON/OFF. |
|
|
|
|
| COLOR SYSTEM | AUTO |
| |
|
|
|
|
|
|
| 3 : 2 PULLDOWN | OFF | |
|
|
|
|
|
|
| Panasonic AUTO (4 : 3) | NORMAL |
|
|
| VIDEO NR | OFF | |
|
|
|
|
|
| SIGNAL | [ COMPONENT ] |
| 3 : 2 PULLDOWN | OFF |
Press to exit from adjust mode. | VIDEO NR | OFF |
|
|
SIGNAL |
|
| [ RGB ] | |
|
|
|
|
|
SYNC |
|
| AUTO |
|
|
|
|
|
|
3 : 2 PULLDOWN |
|
| OFF | |
VIDEO NR |
|
| OFF | |
|
| kHz | ||
33.8 |
| |||
|
|
| Hz | |
60.0 |
| |||
SIGNAL |
| [ Digital ] |
3 : 2 PULLDOWN |
| OFF |
VIDEO NR |
| OFF |
33.8 | kHz | |
60.0 | Hz |
37
