Panasonic TH-37PWD8UK Adjusting POS. /SIZE, Clock Phase, Eliminate the flickering and distortion

Adjusting POS. /SIZE

1

2	Press to display the POS. /SIZE menu.
	Press to select H-POS / H-SIZE / V-POS / V-SIZE /
	CLOCK PHASE.

3 Press to adjust POS. /SIZE.

4 Press to exit from adjust mode.

Notes:

•Adjustment details are memorized separately for different input signal formats (Adjustments for component signals are memorized for 525 (480) / 60i · 60p, 625

(575)/ 50i · 50p, 1125 (1080) / 60i · 50i · 24p · 25p · 30p · 24sF, 1250 (1080) / 50i, 750 (720) / 60p · 50p each, and RGB/PC/DVI signals are memorized for each frequency.)

•If a “Cue” or “Rew” signal from a VCR or DVD player is received, the picture position will shift up or down. This picture position movement cannot be controlled by the POS. /SIZE function.

•If adjusting the PICTURE V-POS / V-SIZE in Panasonic AUTO with FULL mode, the adjustment is not memorized. When exiting the mode, the screen will return to a former adjustment.

During “VIDEO (S VIDEO)”, “COMPONENT” and “DVI” input signal.

POS. /SIZE

NORMALIZE NORMAL

H-POS

H-SIZE

V-POS

V-SIZE

During “RGB / PC” input signal.

POS. /SIZE

NORMALIZE NORMAL

H-POS

H-SIZE

V-POS

V-SIZE

CLOCK PHASE

H-POSAdjust the horizontal position. H-SIZEAdjust the horizontal size.

V-POSAdjust the vertical position. V-SIZEAdjust the vertical size.

CLOCK PHASE	Eliminate the flickering and distortion.
(RGB/PC in mode)

Helpful Hint ( /

NORMALIZE

Normalization)

While the POS. /SIZE display is active, if either the N button on the remote control is pressed at any time or the ACTION () button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.

20