•If a Child Lock PIN number (p. 28) has been set, it must be entered. 
Select the Channel Selection method (Position / Direct)Automatically retune all programmes received in the area.
Set all programmes automatically
■Position
Example
Programme Number Channel Display Received Programme
1 | 2 | 2 |
2 | 4 | 4 |
3 | 6 | 6 |
4 | 8 | 8 |
5 | 10 | 10 |
6 | 12 | 12 |
7 | 14 | 14 |
8 | 16 | 16 |
9 | 18 | 18 |
10 | 20 | 20 |
■Direct
Example
Programme Number Channel Display Received Programme
1 | – | – |
2 | 2 | 2 |
3 | – | – |
4 | 4 | 4 |
5 | – | – |
6 | 6 | 6 |
7 | – | – |
8 | 8 | 8 |
9 | – | – |
10 | 10 | 10 |
When Channel Selection is on Position, and Auto Tuning is performed, the TV memorises the programmes tuned in order from Programme Number 1.
During Position mode various reception programmes can be viewed.
When Channel Selection is on Direct, and Auto Tuning is performed, the TV memorises the Programme Number which is the same as the programme tuned. The Channel Display numbers for the broadcast stations in each region are listed on p. 40.
•
Channel
Selection
Auto Tuning
Start Auto Tuning |
|
|
| |
Access “Auto Tuning” | Settings are made automatically | |||
Auto Tuning |
| Auto Tuning |
|
|
|
| 2 |
| CH4 |
All tuning data will be erased OK | Scan | 1 | 120 | |
|
| EXIT |
|
|
Start Auto Tuning | EXIT |
|
|
|
RETURN
•All the previous tuning settings are erased.
•When the operation is completed, the programme at programme position “1” will be displayed.
•If tuning has not been done completely 
“Manual Tuning”
■For Auto Tuning, using the buttons on the front of the TV (p. 9)
Press repeatedly until “Auto Tuning” appears
Tuning Programmes
Set programme manually
Manual
Tuning
Access “Auto Tuning” |
|
Start “Auto Tuning” | •To return to TV |
■Fine Tuning
Use to make small adjustments to the tuning of an individual programme (affected by weather conditions, etc.)
■Manual Tuning
Set programme manually after Auto Tuning.
•Set Sound System and Colour System, and then perform this function. Normally set Colour System “Auto”.
•If a VCR is connected only with the RF cable, select programme position “0”.
Manual Tuning
1 BBC1 |
|
|
| CH33 | |
Fine Tuning |
|
|
|
|
|
Manual Tuning | 1 |
|
| CH33120 | |
Sound System |
|
|
|
| |
|
| 5.5MHz | |||
Colour System |
|
|
|
| |
|
| Auto | |||
Select the programme position | Select the programme | Search and store | |||
1 | 2 | 3 |
|
| |
4 | 5 | 6 | CH | search | |
7 | 8 | 9 | |||
| store | ||||
| 0 |
|
| ||
Advanced
27
