Panasonic TH-50PZ700A Displaying PC Screen on TV, Select the external input, Select “PC”, Menu

Displaying PC Screen on TV

The screen of the PC connected to the TV can be displayed on the TV.

You can also listen to PC sound with the audio cable connected. To connect PC (p. 34)

INPUT

OPTION SD CARD

EXIT

1 Select the external input

2	Select “PC”
	InputAV1 Selection

RETURN

AV2

AV3

AV4

PC

HDMI1

HDMI2

HDMI3

TV

access

select

•Corresponding signals (p. 39)

•If “H-freq.” or “V-freq.” is shown in red, the signals may not be supported.

■To return to TV

■PC menu setting (changed as desired)

•To make settings “How to Use Menu Functions” to (p. 18)

Menu Item Adjustments / Configurations (options)

Picture	Advanced
	PC
	Settings

Setup	PC
	Setup

•Other items

W/B High R	White balance of bright red area
W/B High B	White balance of bright blue area				and
W/B Low R	White balance of dark red area			repeatedly adjusted
W/B Low B	White balance of dark blue area
Gamma	(2.0 / 2.2 / 2.5 / S Curve)
Reset PC	Press the OK button to reset to the default settings
Settings
Input	Switches to a wide view
	VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
Resolution	•XGA (1,024 × 768 pixels), WXGA (1,366	× 768 pixels)
Clock	•Options change depending on signals
	Set to the minimum level if noise occurs
H-pos	Adjusts horizontal position
V-pos	Adjusts vertical position
	Eliminates flicker and distortion
Clock Phase	•Adjust after Clock adjustment		•Set to the minimum level if noise occurs
Sync	PC sync signal type (H & V / On G)
	H & V : Horizontal and Vertical sync from your PC (Most common sync format)
	•On G : Sync on Green sync from your PC
Reset PC	Press the OK button to reset to the default settings
Settings

p. 20 and p. 21

28