Panasonic TH-42PZ700A Setup, Advanced, Menu list, Adjustments / Configurations alternatives

•A different menu will be displayed while PC, DVI to HDMI adapter cable or SD Card is used. (p. 28-29 and p. 31)

•Only available items can be selected.

Displays the system information of this TV

Refresh Rate

Software Licence System Information

Region Select

Daylight Saving Time

Lights blue LED while SD Card is inserted (Off / On) (p. 31)

Selects the region where you live to adjust the standard time (NSW/ACT / Victoria /

Queensland / South Australia / Western Australia / Northern Territory / Tasmania) (p. 23)

Select time offset from the standard time for Summer Time (Auto / Off / +1/2 Hr / +1 Hr) (p. 23)

•Set to “Auto” normally

Changes the image processing of the panel (depending on the input signal) (50Hz / 100Hz)

•Set to “100Hz” normally

Displays the software licence information

SD Card LED

■Menu list

Menu		Item	Adjustments / Configurations (alternatives)
	DVB Favourites Edit		Creates list of favourite programmes (p. 23)
		Auto Tuning	Automatically sets the channels received in the area (p. 24)
		Analogue	Edits analogue channels (p. 25)
		Programme Edit
	Tuning	DVB Manual	Sets the DVB channels manually (p. 25)
		Tuning
		Analogue	Sets the analogue channels manually (p. 25)
	Menu	Manual Tuning
		Add New DVB	Adds new DVB services (p. 25)
		Services
		New Service	Selects whether to give a notification message when a new DVB service is found (p. 25)
		Message
		DVB Signal	Checks the DVB signal condition (p. 25)
		Display
	Off Timer		Sets the time the TV automatically turns Off (Off / 15 / 30 / 45 / 60 / 75 / 90 minutes)
	Teletext		Teletext display mode (TOP (FASTEXT) / List) (p. 16)
	Shipping Condition		Resets all settings, for example, when moving house (p. 26)
	System Update		Downloads new software to TV (p. 23)
	Power Save		Reduces brightness of picture to economise on power consumption (Off / On)
	Side Panel		Increases the brightness of the side panel (Off / Low / Mid / High)
Setup			•The recommended setting is “High” to prevent panel “image retention”
			Selects the screen area displaying the image (Off / On)
			On : Enlarged the image to hide the edge of the image.
	Picture Overscan		Off : Displayed the image in the original size.
			Set to “On” if noise is generated on the edge of the screen.
			•This function is available when aspect is set to 16:9.
			••1080i or 1080p signal only
	Input Labels		Labels or skips each input terminals (p. 27)
	Banner Display		Sets how long the information banner (p. 11) stays on screen
	Timeout		•0 (No display) to 10 sec. in 1-sec. increments
	VIERA Link	VIERA Link	Sets to use VIERA Link functions (Off / On) (p. 32)
		Power off Link	Set to “Set” to use Power off Link function (No / Set) (p. 33)
	Settings
		Power on Link	Set to “Set” to use Power on Link function (No / Set) (p. 33)

•How to Use Menu Functions (picture, sound quality, etc.)

Advanced

21