Options Adjustments
Options | 2/3 |
| Enable |
|
|
|
|
Initial Power Mode | Normal |
|
|
|
|
ID select | 0 |
|
|
|
|
Remote ID | Off |
|
|
|
|
Serial ID | Off |
|
|
|
|
Display size | Off |
|
|
|
|
Studio W/B | Off |
|
|
|
|
Studio Gain | Off |
Item | Effect |
|
|
|
|
|
| Adjustments | ||||
|
|
| Enable: Enables the | |||||||||
|
| Disable:Disables the | ||||||||||
function | Enable | Disable | ||||||||||
Note: When “Disable” is set, the | ||||||||||||
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
| Normal | Standby | On | |||||||
|
|
| Sets the power mode of the unit for when the power recovers from failure or after plugging off | |||||||||
|
|
| and in again. |
|
|
|
|
| ||||
Initial Power |
|
| Normal: Power returns in as the same state as before the power interruption. | |||||||||
Mode |
|
| Standby:Power returns in standby mode. (Power Indicator : red/orange) | |||||||||
|
|
| On: | Power returns in power On. (Power Indicator : green) | ||||||||
|
|
| Note: When using multiple displays, “Standby” is preferred to be set in order to reduce a power | |||||||||
|
|
|
| load. |
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
| |||
|
|
| Sets panel ID number when panel is used in “Remote ID” or “Serial ID”. | |||||||||
ID select |
|
| Set value range: 0 - 100 |
|
|
|
|
| ||||
|
|
| (Standard value: 0) |
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
| |||
Remote ID |
|
| Off: Disables ID remote control functions. You can use normal remote control operations. | |||||||||
Off | On | On: Enable ID remote control functions. | ||||||||||
| ||||||||||||
|
|
|
|
|
|
|
|
|
|
| ||
|
|
| Sets the panel ID Control. |
|
|
|
|
| ||||
Serial ID | Off | On | Off: Disables external control by the ID. | |||||||||
| On: Enables the external control by the ID. | |||||||||||
|
|
| Adjusts the image display size on screen. | |||||||||
|
|
| Off: Sets the normal image display size on screen. | |||||||||
|
|
| On: Sets the image display size approximately 95 % of the normal image display. | |||||||||
|
|
|
|
| Off |
|
| On | ||||
Display size |
|
| Notes: |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |||
Off | On | • This setting is valid only when the input signals are as follows; | ||||||||||
| ||||||||||||
|
|
| NTSC, PAL, SECAM, M.NTSC, PAL60, | |||||||||
|
|
| 525i, 525p, 625i, 625p, 750/60p, 750/50p, 1125/60i, 1125/50i, 1125/24sF, 1125/25p, 1125/24p, | |||||||||
|
|
| 1125/30p, 1125/60p·50p, 1250/50i (Component Video, RGB, DVI, SDI, HDMI) | |||||||||
•This setting is invalid when two screen display, digital zoom, Multi display or Portrait display is selected.
•When “Display size” is set to “On”,
•Refer to each board’s operating instruction for DVI, SDI, HDMI’s corresponding signals.
|
|
| Off: Nullify all the settings adjusted. |
Studio W/B | Off | On | On: Sets the colour temperature for TV studio. |
| Note: Valid only when the low is set as colour temperature on screen adjustment. | ||
|
|
| Sharpens the contrast for a better view when a part of the image is too light to see. |
|
|
| Off: Disables “Studio Gain”. |
Studio Gain | Off | On | On: Enables “Studio Gain”. |
| Note: This setting is valid only when the input signals are as follows: | ||
|
|
| Component Video, RGB (analog), SDI, HDMI |
47
