Options Adjustments
| Options | 2/3 |
|
| Button lock | Off | |
| Remocon User level | Off | |
| ID select | 0 |
|
| Remote ID | Off | |
|
|
| |
| Serial ID | Off |
|
Item | Effect |
|
| Adjustments |
| Off | MENU&ENTER | On | |
| Off: | All the buttons at the bottom of the main unit can be used. | ||
Button lock | MENU & ENTER: |
|
| |
| Locks and | buttons on bottom face of main unit. | ||
|
| |||
|
| MENU | ENTER/ |
|
On: Locks all the button on bottom face of main unit.
| Off | User1 | User2 | User3 |
|
|
| |
Remocon | Off: | You can use all of the buttons on the remote control. |
|
| ||||
User1:You can only use | , | , , | , , | , , | buttons on the remote control. | |||
User level | User2:You can only use | , | , buttons on the remote control. |
| ||||
|
| |||||||
User3:Locks all the buttons on remote control.
|
|
| Sets panel ID number when panel is used in “Remote ID” or “Serial ID”. |
| |||
ID select |
|
| Set value range: 0 - 100 |
| |||
|
|
| (Standard value: 0) |
|
|
| |
|
|
|
|
|
|
| |
Remote ID |
|
| Off: | Disables ID remote control functions. You can use normal remote control operations. |
| ||
Off | On | On: | Enable ID remote control functions. |
| |||
|
| ||||||
|
|
| Sets the panel ID Control. |
| |||
Serial ID | Off | On | Off: | Disables external control by the ID. |
| ||
| On: | Enables the external control by the ID. |
| ||||
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| Options | 3/3 |
|
|
|
|
|
| Slot power | Off |
|
|
|
|
|
| V. lnstallation | Off |
|
|
|
|
|
| Rotate | Off |
|
|
|
|
|
| Serial Slot Select | Slot1 |
|
|
|
|
|
|
|
|
Item | Effect |
|
| Adjustments |
| ||
|
|
| Off | Auto | On |
| |
Slot Power |
|
| Off: | Power is not transmitted to the slot power. |
| ||
|
| Auto: | Power is transmitted to the slot power only when main power is on. |
| |||
|
|
| On: | Power is transmitted to the slot power when main power is on or in the standby state. |
| ||
|
|
| Note: | In some cases, power is transmitted to the slot power when main power is on or in the standby state regardless of the slot power setting. | |||
|
|
| Off: | Sets fan to the horizontal installation mode. |
| ||
|
|
| On: | Sets fan to the vertical installation mode. |
| ||
V.Installation | Off | On | Notes: |
|
|
|
|
| • This functions when display is turned on. |
| |||||
|
|
|
| ||||
|
|
| • Turn up the power switch for the upward direction when you set Display vertically. |
| |||
Rotate |
|
| Off: | Does not rotate the image. |
| ||
Off | On | On: | Rotates the image 180 degrees. |
| |||
|
| ||||||
Serial Slot |
|
| Slot1 | Slot2 | Slot3 |
| |
|
| Selects the slot which communicates serial. |
| ||||
Select |
|
|
| ||||
|
| Note: The setting of an external command can be set only from the fixed serial terminal (see page 11) | |||||
|
|
| |||||
Normalization
When both main unit buttons and remote control are disabled due to the “Button lock”, “Remocon User level” or “Remote ID” adjustments, set all the values “Off” so that all the buttons are enabled again.
Press the | button on main unit together with | button on the remote control and hold for more than 5 seconds. The |
“SHIPPING” menu is displayed and the lock is released when it disappears.
42
