SCREENSAVER (For preventing image retention)
Setup of SCREENSAVER Time
After selecting INTERVAL or STANDBY AFTER SCR SAVER, the relevant Time Setup will become available for selection and the Operating Time may be set. (Time cannot be set when “MODE” is “ON” or “OFF”.)
Press to select SHOW DURATION / SAVER DURATION (When INTERVAL is selected).
Press to select SCREENSAVER DURATION (When STANDBY AFTER SCR SAVER is selected).
Press to setup.
button: Forward
button: Back
Notes:
•Pressing “ ” or “ ” button once changes the Time 1 minute.
[However, switching occurs every 15 minutes when Periodic Time is selected.]
•Pressing “ ” or “ ” button continuously changes the Time by 15 minutes.
•“SCREENSAVER DURATION” of the “STANDBY AFTER SCR SAVER” can be set from 0:00 to 23:59. When this is set to “0:00”, “STANDBY AFTER SCR SAVER” will not be activated.
SCREENSAVER
START
| MODE |
|
| INTERVAL |
| |
| SHOW DURATION | 12 : 00 |
| |||
| SAVER DURATION | 3 : 00 |
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| SCREENSAVER |
|
|
|
| |
|
|
|
|
|
| |
| START |
|
|
|
| |
| MODE |
| STANDBY AFTER SCR SAVER |
| ||
| SCREENSAVER DURATION | 6 : 15 |
| |||
WOBBLING
Automatically shifts the display image (therefore unnoticeable to the eye) to prevent image retention of sharper contour of image.
1
Press to display the SET UP menu.
2 | Press to select “WOBBLING”. | |
Press to select “ON” or “OFF”. | ||
| ||
| ON: Shifts the position of the display image on a fixed time | |
| interval. | |
3 | Press to exit from adjust mode. | |
Notes: |
|
•If “MULTI DISPLAY SETUP” is set to “ON”, this function does not operate.
•When this function is operating, part of the screen may appear to be missing.
SET UP | 1/2 |
SIGNAL
SCREENSAVER
INPUT LABEL
ECO MODE SETTINGS
WOBBLING | OFF |
| RGB |
NO ACTIVITY POWER OFF | |
| DISABLE |
OSD LANGUAGE | ENGLISH (US) |
28