SET UP for Input Signals
XGA MODE
This menu is displayed when the PC IN input signal is selected.
This menu sets two types of XGA signals with 60Hz vertical frequency having different aspect ratios and sampling rates (1,024 × 768 @ 60Hz and 1,366 × 768 @ 60Hz).
When a 1,280 x 768 @ 60Hz input signal is automatically detected, the image is processed as a 1,280 x 768 @ 60Hz XGA input signal irrespective of this setting.
Press to select “XGA MODE”.
Press to select “1024×768”, “1366×768”.
XGA MODE | 1024×768 |
|
|
Note:
After making this setting, be sure to make each adjustment (such as “AUTO SETUP”) on the “POS. /SIZE” menu as necessary. (see page 22)
NOISE REDUCTION
Press to select “NOISE REDUCTION”.
Press to select “OFF”, “AUTO”, “MIN”, “MID”, “MAX”. AUTO: NOISE REDUCTION will be automatically
selected from “MIN”, “MID” or “MAX”.
NOISE REDUCTION | OFF |
Note:
NOISE REDUCTION can be adjusted while a Component signal from PC IN terminal is being applied.
SYNC
This function operates only during input from PC IN terminal.
Press to select the “SYNC”.
Press to adjust.
| SIGNAL | [ RGB ] | |
|
|
|
|
| SYNC | AUTO | |
|
|
|
|
| 3 : 2 PULLDOWN | OFF |
|
|
|
|
|
| XGA MODE | 1024×768 |
|
|
|
|
|
Confirm that the input is set to RGB input (this setting is valid only for RGB input signal).
AUTO:The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync. However, the synchronized signal that is input first is selected.
ON G: Uses a synchronized signal on the Video G signal, which is input from the G connector.
37