Options Adjustments

Item

Locks the input switch operation.

Adjustments

 

Off

 

Off

PC

DVI

HDMI

Input lock

Notes:

 

 

 

 

•Only the adjusted signal is displayed (see page 16).

•Input switch can be used when this is set to “Off”.

 

Off

On

 

MENU&ENTER

 

 

 

 

 

Off: All the buttons on main unit can be used.

 

 

 

 

 

 

MENU

ENTER/

buttons on main unit.

 

 

 

MENU&ENTER: Locks

and

 

 

Button lock

On: Locks all the button on main unit except the Power switch.

 

Sets Button lock with the unit buttons in the following procedure.

ENTER/

 

Off: Press

 

 

INPUT

four times→Press

 

 

four times→Press

four times→Press

 

 

 

 

ENTER/

 

 

 

INPUT

ENTER/

 

MENU&ENTER: Press

four times→Press four times→Press

four times→Press

 

On: Press

four times→Press ENTER/ four times→Press

four times→Press ENTER/

 

Off

User1

User2

User3

 

 

 

 

Off:

You can use all of the buttons on the remote control.

 

Remocon User level

User1:You can only use

, , ,

,

buttons on the remote control.

User2:You can only use button on the remote control.

User3:Locks all the buttons on remote control.

Enable: Enables the “Off-timer function”.

Off-timer function Disable: Disables the “Off-timer function”.

Note: When “Disable” is set, the Off-timer is cancelled.

 

Normal

On

Standby

 

Sets the power mode of the unit for when the power recovers from failure or after plugging off and in again.

Initial Power Mode

Normal: Power returns in as the same state as before the power interruption.

Standby: Power returns in standby mode. (Power Indicator : red/orange)

 

 

On:

 

Power returns in power On. (Power Indicator : green)

 

Note: When using multiple displays, “Standby” is preferred to be set in order to reduce a power load.

ID select

Sets panel ID number when panel is used in “Remote ID” or “Serial ID”.

Set value range: 0 - 100

 

(Standard value: 0)

 

 

The setting of this menu is valid only when using ID remote control.

 

Off:

Disables ID remote control functions. You can use normal remote control operations.

Remote ID

On:

Enable ID remote control functions.

Note: To use the ID remote control function, it is necessary to set each ID number of remote control and

 

 

 

display unit. About the setting method, please refer to “ID Remote Control Function” (see page 34)

 

 

and “ID select” (above-mentioned).

 

Sets the panel ID Control.

Serial ID

Off:

Disables external control by the ID.

 

On:

Enables the external control by the ID.

 

Off:

Nullify all the settings adjusted.

Studio W/B

On:

Sets the color temperature for TV studio.

 

Note: Valid only when the “WARM” is set as “COLOR TEMP” in PICTURE menu.

 

Off

1

2

3....

30

 

 

 

You can set the power-on delay time of the displays to reduce the power load, when you press

to turn

 

on the multiple displays that are set together, for example, on MULTI DISPLAY system.

 

Power ON Screen

Set each display’s setting individually.

 

 

Off:

 

The display will be turned on at the same time as

is pressed.

 

Delay

1 to 30 (sec.): Set the power-on delay time (second).

 

 

 

Notes:

 

After pressing

, the display will be powered on with time delay depending on this setting.

 

 

 

 

 

 

 

•During this function is working, the power indicator is blinking green.

•This function also works when the power recovers from failure or after plugging off and in again the power cord.

 

Whether to show/hide No activity power off Precautions at the time of power ON is set.

Power On Message

On: The warning precautions are shown at the time of power ON.

(No activity power

Off: The warning precautions are not shown at the time of power ON.

off)

Note:

 

This setting is enabled only if “NO ACTIVITY POWER OFF” is “ENABLE” (see page 29).

40