ECO MODE SETTINGS

Press , select “ECO MODE SETTINGS”

in “SETUP” menu and press button.

ECO MODE SETTINGS

ECO MODE CUSTOM

NO SIGNAL POWER OFF

 

 

ENABLE

 

 

 

PC POWER MANAGEMENT

 

 

 

 

ON

 

 

 

 

 

DVI-D POWER MANAGEMENT

 

 

OFF

 

 

 

 

 

POWER SAVE

 

OFF

 

1 select

2 adjust

ECO MODE

CUSTOM: The menu of power consumption reduction is individually set.

ON: The following fixed values are set to the menu of power consumption reduction. Individual setting is not available.

NO SIGNAL POWER OFF: ENABLE

DVI-D POWER MANAGEMENT: ON

PC POWER MANAGEMENT: ON

POWER SAVE: SENSOR

Using Remote Control

When

is pressed, the “ECO MODE” setting

changes.

 

 

 

 

 

ECO MODE

ON

 

 

 

 

 

Custom settings

The menu of the power consumption reduction is individually set. This setting is enabled when “ECO MODE” is set to “CUSTOM”.

NO SIGNAL POWER OFF

Equipment power supply is turned OFF when there is no signal.

When this is set to “ENABLE”, the power supply of the unit goes Off 10 minutes after the input signals stop.

PC POWER MANAGEMENT

When this function is set to ON, it operates under the following conditions to turn the power on or off automatically. When no pictures (HD/VD sync signals) are detected for 30 or so seconds during PC signal input:

→Power is turned off (standby); the power indicator lights up orange. When pictures (HD/VD sync signals) are subsequently detected:

→Power is turned on; the power indicator lights up green.

Notes:

•This function operates only during input from PC IN terminal.

•This function is effective when “SYNC” is set to “AUTO”, “COMPONENT / RGB-IN SELECT” is set to “RGB” and during normal viewing.

DVI-D POWER MANAGEMENT

When this function is set to ON, it operates under the following conditions to turn the power on or off automatically. When no pictures (sync signal) are detected for 30 or so seconds during DVI signal input:

→Power is turned off (standby); the power indicator lights up orange. When pictures (sync signal) are subsequently detected:

→Power is turned on; the power indicator lights up green.

Note:

This function operates only during DVI signal input.

POWER SAVE

This function adjusts the brightness of the backlight to reduce power consumption. OFF: This function does not operate.

ON: Backlight brightness is reduced.

SENSOR: The backlight brightness is automatically adjusted according to the viewing environment.

Note:

When this function is set to “ON” or “SENSOR”, the “BACKLIGHT” setting in the PICTURE menu is disabled.

30