Connections

Speaker connection

When connecting the speakers, be sure to use only the optional accessory speakers. Refer to the speaker’s Installation Manual for details on speaker installation.

Speakers (Optional accessories)

Speaker terminal

AC cord connection (see page 16)

1

Red

Black

While pressing the lever, insert the core wire.

2

Red

Black

Return the lever.

AC cord connection and fixing, cable fixing

ACcordxing

Unplug the AC cord

Plug the AC cord into the display unit.

Plug the AC cord until it clicks.

Note:

Make sure that the AC cord is locked on both the left and right sides.

Unplug the AC cord pressing the two knobs.

Note:

When disconnecting the AC cord, be absolutely sure to disconnect the AC cord plug at the socket outlet first.

 

When using the Wall-hanging bracket (vertical)

 

Note:

Using the clamper

When using the Wall-hanging bracket (vertical) (TY-WK42PV20), use the holes and to secure the

cables. If the clamper is used on the hole , the cables may be caught by the wall-hanging bracket.

Secure any excess cables with clamper as required.

Note:

One clamper is supplied with this unit. In case of securing cables at three positions, please purchase it separately.

1 Attach the clamper

To remove from the unit:

hole

snaps

 

Insert the clamper

Keep

in a hole.

pushing both

 

side snaps

2 Bundle the cables

To loosen:

 

Set the

 

Keep

hooks

tip in the

knob

pushing

 

hooks

 

the knob

11