Connections

Video equipment connection

Terminals are on the bottom side of the Plasma Display.

SERIAL:

Control the Plasma Display by connecting to PC.

(see page 15)

3D IR TRANSMITTER: Connect the 3D IR TRANSMITTER (optional accessory).

SLOT: Terminal board (optional accessories) insert slot

(see page 6)

Note:

The right side slot is for terminal board with 2-slot width. The terminal board with 1-slot width does not function when installed in the right side slot.

AV IN (VIDEO): Composite Video Input Terminal

(see below)

COMPONENT/RGB IN: Component/RGB Video Input

Terminal (see below)

DVI-D IN: DVI-D Input Terminal (see page 13)

PC IN: PC Input Terminal Connect to video terminal of PC or equipment with Y, PB(CB) and PR(CR) output. (see page 14)

AV IN (HDMI): HDMI Input Terminal (see page 13)

Connect to video equipment such as VCR or DVD player.

WIRELESS MODULE, LAN: Refer to “Operating Instructions, Network Operations”.
VIDEO and COMPONENT / RGB IN connection

Note:

Additional equipment, cables and adapter plugs shown are not supplied with this set.

VIDEO

OUT

RCA-BNC

L

 

 

Adapter plug

R

AUDIO

VCR

 

OUT

AUDIO L-R: Shared with VIDEO and

COMPONENT/RGB IN

Notes:

 

 

• Change the “COMPONENT/RGB-IN select” setting in the “SETUP”

menu to “COMPONENT” (when COMPONENT signal connection)

or “RGB” (when RGB signal connection). (see page 51)

• Signals input to COMPONENT/RGB IN terminals correspond to

SYNC ON G or SYNC ON Y.

 

L

 

DVD Player

 

AUDIO

R

 

OUT

 

RCA-BNC

Computer

RGB Camcorder

Adapter plug

Y

 

 

PB Y, PB, PR,

 

PR

OUT

 

 

 

12