Panasonic TH50PF50U PICTURE Adjustments, Note:, CINEMA, Notes:, DYNAMIC, MONITOR, STANDARD

PICTURE Adjustments

1 Press to display the PICTURE menu.

2Select to adjust each item.

Press to select the menu to adjust.

Select the desired level by looking at the picture behind the menu.

Note:

Menu that cannot be adjusted is grayout. Adjustable menu changes depending on signal, input and menu setting.

PICTURE							Press the left	or right	button to switch between modes.
			NORMAL				STANDARD		DYNAMIC
NORMALIZE
PICTURE MENU					STANDARD		MONITOR		CINEMA
PICTURE					25		STANDARD
BRIGHTNESS					0
							For viewing in standard (evening lighting) environments.
COLOR					0
TINT					0		This menu selects the normal levels of BRIGHTNESS
SHARPNESS					5		and PICTURE.
COLOR TEMP					NORMAL
							DYNAMIC
ADVANCED SETTINGS
							For viewing in brighter environments.
							This menu selects higher than normal levels of
							BRIGHTNESS and PICTURE.
							CINEMA
							For use in viewing tone-focused pictures with
							brightness reduced.
				Press to enter Advanced			MONITOR
				Settings.			For use when creating broadcast or movie content. With
							this picture, even if the overall average picture level (APL)
ADVANCED SETTINGS							changes, the brightness of areas with the same signal
							level does not change.
Enables fine picture adjustment at a professional							Notes:
level (see next page).
							● When “MONITOR” is selected in PICTURE MENU, the
							following menu items cannot be set.
	ADVANCED SETTINGS
							EXTENDED LIFE SETTINGS: PEAK LIMIT (see page 41)
		NORMALIZE		NORMAL		0	MULTI DISPLAY SETUP menu: VIDEO WALL UNIFORMITY (see page 48)
		BLACK EXTENSION
							PORTRAIT SETUP menu: VIDEO WALL UNIFORMITY (see page 50)
		INPUT LEVEL				0
							● If you would like to change the picture and color of the
		GAMMA				2.2
		W/B HIGH R				0	selected PICTURE menu to something else, adjust using
		W/B HIGH G				0	the items in the PICTURE menu. (see next page)
		W/B HIGH B				0
		W/B LOW R				0
		W/B LOW G				0	Press the left	or right	button to switch between modes.
		W/B LOW B				0	NORMAL (9300K)		COOL (11500K)	WARM (6500K)

Helpful Hint ( / NORMALIZE Normalization)

While the “PICTURE” menu is displayed, if either the N button on the remote control is pressed at any time or the ACTION () button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.

29