Options Adjustments
Touch Panel settings (Settings when using Touch Panel)The mode to restrict NANODRIFT SAVER (see page 41) operation when using Touch Panel (available as an option) is set up.
Options1/3
Weekly Command Timer
Audio input select
Touch Panel settings
Press ACTION ( | ) button Set “Touch Panel mode” to “On”. |
| ||
Touch Panel settings | 1 | select | NANODRIFT SAVER in Touch Panel mode: On | |
|
| |||
Touch Panel mode | 2 | adjust The value set for NANODRIFT turns into “ON” and displayed | ||
On |
| in gray. |
| |
Calibration mode |
|
|
| |
|
|
| The moving distance of NANODRIFT is limited to 5 × 5 dots to | |
|
|
| prevent pointer drift on a touch panel. | |
| Calibration mode |
|
|
|
|
This setting is used in calibrating a touch panel. |
|
|
| |
You can configure the setting if “Touch Panel mode” is “On”. |
| |||
| Select “Calibration mode” and then press | . | ||
Touch Panel settings | 1 | select | When the menu is not displayed | |
|
| |||
Touch Panel mode | On |
| (normal screen) |
|
| Hold down for over 3 seconds. | |||
Calibration mode |
|
| ||
ª | 2 | set |
|
|
Calibration mode
The screen is displayed in the middle and NANODRIFT is deactivated for 180 seconds. After 180 seconds or when you have the menu displayed with a remote control, Calibration mode is cancelled.
Note:
For information on how to set up Calibration, please see Touch Panel instruction manual.
61