Basic Controls
Standby (ON / OFF) button
The Plasma Display must first be plugged into the wall outlet and turned on at the power switch (see page 13). Press ON to turn the Plasma Display On, from Standby mode. Press OFF to turn the Plasma Display Off to Standby mode.
POSITION buttons | R button (see page 17) |
| Press the R button to return to previous menu screen. |
ACTION button Press to make selections.
SOUND button
(see page 25)
Status button
Press the “Status” button to display the current system status.
PC | 1 | Input label |
NORMAL | 1 |
22 Aspect mode (see page 19)
3 Off timer
The off timer indicator is
OFF TIMER 90 | 3 | displayed only when the off |
|
timer has been set.
SET UP button (see page 16, 17)
DIRECT INPUT buttons
Press the INPUT “1”, “2”, “3” or “PC” input mode selection button to select the INPUT mode.
This button is used to switch directly to INPUT mode.
These buttons can only display the slot which is installed. If you press the button whose slot is not installed, it automatically displays the current input signal.
Note:
Channel Adjustment
This button cannot be used for this model.
Volume Adjustment
Press the Volume Up “+” or Down
OFF TIMER button
The Plasma Display can be preset to switch to
30 60 90
0
When three minutes remain, “OFF TIMER 3” will flash.
The off timer is cancelled if a power interruption occurs.
Remote ID lock (see page 35)
Digital Zoom (see page 26)
Press to access
Digital Zoom.
This displays an enlargement of the designated part of the displayed image.
15
