Panasonic TQBC2033 COLOR SYSTEM / Panasonic AUTO, Pulldown / Video Nr, SET UP for Input Signals

SET UP

SET UP for Input Signals

COLOR SYSTEM / Panasonic AUTO

Select SIGNAL from the “SET UP” menu during VIDEO (S VIDEO) input signal mode.(“SIGNAL [VIDEO]” menu is displayed.)

Press to select the “COLOR SYSTEM” or “Panasonic

AUTO”.

Press to select each function.

If the image becomes unstable:

With the system set on Auto, under conditions of low level or noisy input signals the image may in rare cases become unstable. Should this occur, set the system to match the format of the input signal.

SET UP	1/2
SIGNAL
COMPONENT/RGB-IN SELECT
	RGB
INPUT LABEL	PC
POWER SAVE	OFF
STANDBY SAVE	OFF
POWER MANAGEMENT	OFF
AUTO POWER OFF	OFF
OSD LANGUAGE	ENGLISH (US)

Press ACTION () button

SIGNAL	[ VIDEO ]
3D Y/C FILTER (NTSC)	ON
COLOR SYSTEM	AUTO
3 : 2 PULLDOWN	OFF
Panasonic AUTO (4 : 3)	NORMAL
VIDEO NR	OFF

Mode			Function
COLOR SYSTEM	Set the color system to match the input signal. If set to “AUTO”, the color system is determined
	automatically.
	AUTO	PAL	SECAM	M.NTSC	NTSC
Panasonic AUTO	Set to “NORMAL” to view 4:3 images in an unchanged format when Panasonic AUTO is
(4 : 3 )	selected. If you would like to view 4:3 images in Just format, set to “JUST”.

3:2 PULLDOWN / VIDEO NR

3:2 PULLDOWN: When ON, the display attempts to reproduce a more natural interpretation of sources such as movie

pictures, which are recorded at 24 frames per second.1/2 If the picture is not stable, turn the setting to OFF.

Note:
	SIGNAL
When ON, this setting only affects the following signal input:
	COMPONENT/RGB-IN SELECT
			RGB
• NTSC / PAL signal input during “VIDEO (S VIDEO)” input signal.
	INPUT LABEL		PC
• 525i(480i) 625i(575i), 1125(1080)/60i signal input during “COMPONENT” input signal.
	POWER SAVE		OFF
	STANDBY SAVE		OFF
VIDEO NR: Automatically reduces unwanted picture noise.	POWER MANAGEMENT		OFF
	AUTO POWER OFF		OFF
Note:
	OSD LANGUAGE	ENGLISH (US)

VIDEO NR cannot be adjusted while a PC signal is being applied. Press ACTION ( ) button

1

2

Press to select 3:2	SIGNAL	[ VIDEO ]	SIGNAL		[ RGB ]
PULLDOWN or VIDEO NR.
	3D Y/C FILTER (NTSC)	ON	SYNC		AUTO
Press to set ON/OFF.
	COLOR SYSTEM	AUTO	3 : 2 PULLDOWN		OFF
	3 : 2 PULLDOWN	OFF	VIDEO NR		OFF
	Panasonic AUTO (4 : 3)	NORMAL	H-FREQ.	33.8	kHz
	VIDEO NR	OFF
			V-FREQ.	60.0	Hz

	SIGNAL	[ COMPONENT ]	SIGNAL		[ Digital ]
	3 : 2 PULLDOWN	OFF	3 : 2 PULLDOWN		OFF
Press to exit from adjust mode.	VIDEO NR	OFF	VIDEO NR		OFF
			H-FREQ.	33.8	kHz
			V-FREQ.	60.0	Hz

37