Panasonic TX-15LT2 Basic controls, Direct Programme Number Selection CH, Mute button

Basic controls

(LCD TV Set)

PICTURE
SOUND
SET UP
	TV/AV
TV/TEXT	F.P. INDEX HOLD

1	Direct Programme Number Selection (CH
	SELECT = POSITION)
2	You can select the numbers directly by
3	pressing “Number 0-9” button and the two digit
6	Numbers by pressing “Two Digit” and
	“Programme Number” buttons.
	Programme Number 8 ....... 8
5	Programme Number 12	,	1	, 2
	Direct Programme Number Selection (CH
	SELECT = DIRECT)
	You can select the number directly by
	pressing the “C” button and the
	corresponding programme number button.
	Channel Number 21...... C ,	2	,	1
	Channel Number 68...... C ,	6	,	8
2	Mute button
	Press this button to mute the sound
2	completely.
	The “Mute” symbol will appear.
	Press the button once again to restore the
3	previous sound level, and cancel the mute.
4	Sound is also reactivated when power is
	turned off or volume level is changed.

1	1	2	3
		5	6
	4
	ASPECT	8	9
	7
		VCR
	C	0

3

TV/AV

TV/AV

TV/AV Mode Selection

Press the “TV/AV” button to select TV, AV1, AV2, AV2S input signal modes sequentially.

Remote control :

Press the “TV/AV” menu button

	DVD
REC	VCR
	PROGRAMME
N
	STR

	Press the relevant on screen selector key to
	select the AV source you wish to view (for
	example, press the Red button to select AV1
	if you have connected a video recorder to
Red Green Yellow Blue	the AV1 SCART socket).
5	Otherwise, you can toggle between AV2 and
	AV2S with the Green button.
	The on screen selector keys that appear
	clear after a few seconds. If you want to
	select an input when the keys are not
	shown, press the “TV/AV” key once more
	and the keys will reappear.
	Note:
	During AV mode selection, the picture from
	certain source signals may momentarily distort
	or change colour, but this is normal operation.

10