ASPECT CONTROLS

The widescreen TV will allow you to enjoy viewing the picture at its maximum size, including

widescreen ‘cinema format’ pictures.

Note: Just mode is not available when viewing an RGB source.

Press the ASPECT button to move through the ASPECT six aspect options: Panasonic Auto, 4:3, Zoom, 16:9 (Full), 14:9 and Just.

Panasonic Auto

Panasonic Auto determines the best aspect ratio to use to display the picture you are viewing. It does this using a four step process to determine if the picture being viewed is a widescreen picture.

If Panasonic Auto detects a widescreen signal it switches into the appropriate 16:9 or 14:9 widescreen mode. If Panasonic Auto does not detect a widescreen signal then the picture is displayed in Just or 4:3 mode.

WIDE

’WIDE’ appears in the top left of the screen, Panasonic Auto switches to the appropriate 16:9 or 14:9 widescreen ratio.

The text shown on the screen indicates how Panasonic Auto determined which ratio to use:

’WIDE’ appears in the top left of the screen if a widescreeen identification signal (WSS) is found or a signal found through a Scart socket. Panasonic Auto switches to the appropriate 16:9 or 14:9 widescreen ratio

’Panasonic Auto’ appears in the top left of the screen if black stripes above and below the picture are detected. Panasonic Auto chooses the best ratio and expands the picture to fill the screen. This process can take several minutes, depending how dark the picture is.

’Panasonic Auto’ appears in the top left of the screen and red and green keys at the bottom if no indication of a widescreen signal is found, the picture is displayed in Just or 4:3 mode. If the picture has a standard 4:3 aspect ratio then you may prefer to view it at its original size, the red and green keys that appear allow you to choose between viewing at standard 4:3 size or expanded in Just mode.

Equally, you may prefer to select one of the other modes available to view the picture.

Notes:

DIf, in Panasonic Auto mode, you experience problems with the screen display size when playing back widescreen format recordings from your VCR then it is possible that the tracking control of your VCR requires adjustment (your VCR instruction book will contain adjustment details).

DThe widescreen aspect ratios of different films and programmes can vary. If these are wider than a standard 16:9 aspect picture then a black band may be visible at the top and bottom of the screen.

Panasonic Auto

’Panasonic Auto’ appears in the top left of the screen,

The best ratio is chosen and the picture expanded to fill the screen.

Panasonic Auto

4:3

Just

 

 

’Panasonic Auto’ appears in the top left of the screen,

The picture is displayed in Just or 4:3 mode,

red and green keys appear, allowing switching between

Just and 4:3 modes.

15

Page 15
Image 15
Panasonic TX-28PL4 manual Aspect Controls, Panasonic Auto