8
4. Q-- Link connection of TV, VCR and Satellite Receiver using Scart and RF cables
For Q-- Link to function correctlythe TV, VCR and Satellite Receivermust be connected as shown in the diagram below.
Scart Connections
’Fully wired’ Scartcables should be used for all of the Scart connections.
DTheAV2ScartoftheVCRmustbeconnectedtotheVCRsocketoftheSatelliteReceiver.
DThe TV Scart socket of the Satellite Receiver must be conn ected to the AV1 Scart socket of the TV.
Note :
If usinga “Q-- Link ” VCR then the AV1 Scartof theV CR must be connected to the AV2 socket of the TV.If your VCR is not a “Q-- Link”
VCR, please consult your VCR operat ing instruction book.
RF Connections
DConnect an RF cable to the Aerial In socket of the Satelli te Receiver.
DConnect an RF cable from the RF Out socket of the Satellite Receiver tothe R F In socket of the VCR.
DConnect an RF cable from the RF Out socket of the VCR to the TV Aerial In socket ( ).
Mains
Socket
TV
SATELLITE
RECEIVER
VCR Scart
socket
TV Scart
socket
Aerial
Input
socket
Aerial
Output
socket
AV2
Scart socket
VCR
Mains
Socket
Mains
Socket Aerial
Input
socket
Aerial
Output
socket
Aerial
Input
socket
AV1 Scart
socket
AV2 Scart
socket
AV1
Scart socket
Notes :
Additional equipment and cablesare not supplied.
Further details of Audio/ Video connectionscan be f ound onpages 40 and 41.
Further information for VCR and Satellite Receiver installation with this TV can be found on page 36.
QUICK START GUIDE