Panasonic TX-28PL4 What You See Is What You Record Direct TV Recording, TV / VCR Auto Power On

Q-LINK

What You See Is What You Record (DIRECT TV RECORDING)

This will allow the immediate recording of the program currently shown on the Television.

DIRECT

TV REC

Press the DIRECT TV REC button on the remote control

If the VCR is in Standby mode with a useable tape inserted, it will automatically switch on when you press the DIRECT TV REC button.

If a “Q-- Link” VCR is connected a message will appear on the TV screen showing what is being recorded, or if it is not possible to record. Some “Q-- Link” compatible VCR’s will only display the message when on the VCR programme position(0) or in AV mode. Refer to the VCR operating instruction book.

VCR recording preset prog

Recording this programme now

VCR is recording the programme signal from its own tuner. If you wish you can switch off the TV and leave the VCR recording in the normal way.

VCR recording TV source

VCR is recording the programme signal from the television.

You must not change programme position or switch off the TV: if you do, the VCR will automatically stop recording and switch off.

No recording -- TAPE IS PROTECTED

The write protection tab on the back of the cassette

has been removed.

Examples of other messages that might be displayed are:

No recording -- NO TAPE

No recording -- VCR IS PLAYING

VCR Recording VCR external

No recording -- ALREADY RECORDING!

No recording -- TAPE MAY BE DAMAGED

No recording -- NO SOURCE AVAILABLE

TV / VCR Auto Power On

(With a Panasonic Q-- Link VCR connected, this additional feature is available).

DIf you insert a tape in the VCR and press the Play button whilst the TV is in ’Standby’ mode, the TV will automatically switch On and select the AV2 input so that you can view the tape.

Some other VCR’s may support this feature. Refer to the VCR operating instruction book.

VCR Auto Power Standby

(With a Panasonic Q-- Link VCR connected, this additional feature is available).

When the TV is switched into ’Standby’ mode, the VCR will also switch into ’Standby’ mode if there is no tape in the VCR, or

if there is a tape in and the VCR is in ’Rewind’ or ’Stop’ mode (if the VCR is rewinding a tape, it will not switch into ’Standby’ mode until rewinding has finished).

Some other VCR’s may support this feature. Refer to the VCR operating instruction book.

VCR Image View On

(With a Panasonic Q-- Link VCR connected, this additional feature is available).

If the TV is in Standby mode and the VCR sends a menu to be displayed on the TV screen (e.g. Main menu), the TV will automatically switch On and the menu will be displayed.

Some other VCR’s may support this feature. Refer to the VCR operating instruction book.

32