Quick Start Guide
1
Connection and setting up options
Please ensure that the unit is disconnected from the mains before attaching or disconnecting any leads.
RF cable (Not supplied)
RF cable (Not supplied)
SET TOP BOX
Scart cables (Not supplied)
VCR / DVD
RecorderOR
2
Plug in aerial and connect ancillary equipment.
Connect the mains plug to the wall socket.
Press the [
] switch on the TV set to turn the set on.
To switch the TV set to Standby mode, press the 
button on the remote control.
The TV set can be switched on by pressing the 
button again if it was in Standby mode.
Note:
This TV will still consume some power as long as the mains plug is still inserted into the wall
socket.
Power Indicator
OK
1 2 3
4 5 6
7 8 9
C 0
N
TV
Standby : Red
On : No Light
Remote control signal sensor
Red light indicates Standby mode.
When using remote control, this indicates the
TV has received a command.
5
