ZyXEL Communications 642R Series Novell IPX Ethernet Setup Fields, Network Ethernet, Snap

Prestige 642R Series ADSL Router

6.3IPX Ethernet Setup

From Menu 3 – Ethernet Setup, select option 3 to got to Menu 3.3 - Novell IPX Ethernet Setup as shown in Figure 6-3.

Menu 3.3 - Novell IPX Ethernet Setup

Seed Router= No

Frame Type 802.2= Yes

IPX Network #= N/A

Frame Type 802.3= No

IPX Network #= N/A

Frame Type Ethernet II= No

IPX Network #= N/A

Frame Type SNAP= No

IPX Network #= N/A

Press ENTER to Confirm or ESC to Cancel:

Press Space Bar to Toggle.

Figure 6-3 Menu 3.3 - Novell IPX Ethernet Setup

The following describes the Novell IPX Ethernet Setup menu.

Table 6-1 Novell IPX Ethernet Setup Fields

FIELD	DESCRIPTION	OPTIONS
Seed Router	Determines if your Prestige is to act as a seed router.	Yes or No
Frame Type	Enable/Disable the individual frame type.	802.2
	Remember to enable only the ones that are actually used on your	802.3
	network.	Ethernet II
		SNAP

IPX Network

#

If your Prestige is a seed router, enter a unique network number for each frame type enabled.

Press [ENTER] at the message [Press ENTER to Confirm . . . ] to save your configuration, or press [ESC] at any time to cancel.

6-4 IPX Configuration