
Prestige 642R Series ADSL Router
2.8Navigating the SMT Interface
The SMT (System Management Terminal) is the interface that you use to configure your Prestige. Several operations that you should be familiar with before you attempt to modify the configuration are listed in the table below.
| Table | Main Menu Commands | |
Operation | Press/<read> | Description | |
|
|
| |
Move down to | [ENTER] | To move forward to a | |
another menu |
| desired | |
|
|
| |
Move up to a | [ESC] | Press the [ESC] key to move back to the previous menu. | |
previous menu |
|
|
|
|
|
| |
Move to a | Press [SPACE | Fields beginning with “Edit” lead to hidden menus and have a | |
“hidden” menu | BAR] to change | default setting of No. Press [SPACE BAR] to change No to Yes, | |
| No to Yes then | then press [ENTER] to go to a “hidden” menu. | |
| press [ENTER]. |
|
|
Move the cursor | [ENTER] or | Within a menu, press [ENTER] to move to the next field. You can | |
[Up]/[Down] arrow | also use the [Up]/[Down] arrow keys to move to the previous and | ||
| the next field, respectively. | ||
| keys | ||
|
|
| |
|
|
| |
Enter | Fill in, or | You need to fill in two types of fields. The first requires you to | |
information | Press the [Space | type in the appropriate information. The second allows you to | |
| cycle through the available choices by pressing the [Space] bar. | ||
| bar] to toggle | ||
|
|
| |
|
|
| |
Required fields | <? > | All fields with the symbol <?> must be filled in order be able to | |
|
| save the new configuration. | |
|
|
| |
N/A fields | <N/A> | Some of the fields in the SMT will show a <N/A>. This symbol | |
|
| refers to an option that is Not Applicable. | |
|
|
| |
Save your | [ENTER] | Save your configuration by pressing [ENTER] at the message | |
| [Press ENTER to Confirm or ESC to Cancel]. Saving the data on | ||
configuration |
| the screen will take you, in most cases, to the previous menu. | |
|
|
| |
Exit the SMT | Type 99, then | Type 99 at the Main Menu prompt and press [ENTER] to exit the | |
press [ENTER]. | SMT interface. | ||
|
|
|
|
Hardware Installation & Setup |