ZyXEL Communications 642R Series manual Field Description Options, Ppp, Enet, Encap

Prestige 642R Series ADSL Router

Menu 11.1 - Remote Node Profile

Rem Node Name= ChangeMe	Route= IP
Active= Yes	Bridge=	No
Encapsulation= PPP	Edit PPP Options= No
Multiplexing= LLC-based	Rem IP Addr= 0.0.0.0
Incoming:	Edit IP/IPX/Bridge= No
Rem Login=
Rem Password= ********	Session	Options:
Outgoing:	Edit Filter Sets= No
My Login=	PPPoE	Idle Timeout(sec)= N/A
My Password= ********	PPPoE	Service Name=
Authen= CHAP/PAP

Press ENTER to Confirm or ESC to Cancel:

Press Space Bar to Toggle.

Enter a unique name of 8 or less characters for the Remote Node Name.

Enter the IP Address of the Remote Gateway here.

	Figure 4-2		Menu 11.1 - Remote Node Profile
	Table 4-1		Remote Node Profile Menu Fields
FIELD			DESCRIPTION	OPTIONS
Rem Node Name		This is a required field. Enter a descriptive name for the
		remote node, for example, Corp. This field can be up to
		eight characters. This name must be unique from any
		other remote node name or remote dial-in user name.
Active		Press [space bar] to toggle between Yes and No.		Yes or No
		Inactive nodes are displayed with a minus sign (–) at the
		beginning of the name in Menu 11.
Encapsulation		PPP refers to RFC-2364 (PPP Encapsulation over ATM		PPP
		Adaptation Layer 5). If RFC-1483(Multiprotocol		RFC-1483
		Encapsulation over ATM Adaptation Layer 5) of ENET
		ENCAP are selected, then the Rem Login, Rem		ENET
		Password, My Login, My Password, Edit PPP		ENCAP
		Options and Authen fields is not applicable (N/A).
		Moreover, ENET ENCAP encapsulaton does not apply
		for IPX routing.

Remote Node Configuration 4-3